What is Support Level Supplement (SLS) OSS711A, the OpenServer 6.0.0 Maintenance Pack 4 Supplement? KEYWORDS: sls oss oss711 oss711a 600 6.0.0 openserver osr6 maintenance pack 4 patch supplement kernel panic reference count internet protocol control block fz535347 RELEASE: SCO OpenServer Release 6.0.0 PROBLEM: What problems are fixed by Support Level Supplement (SLS) OSS711A, the OpenServer 6 Maintenance Pack 4 Supplement? SOLUTION: OSS711A contains the following fix: 1. Failure to check a reference count when releasing an internet protocol control block (PCB) resulted in a kernel panic or system hang. This problem has been fixed. fz535347 This supplement can be installed on the following SCO OpenServer releases: SCO OpenServer Release 6.0.0 with Maintenance Pack 4 ---------------------------------------------------------- I. Software Notes and Recommendations 1. If you have any questions concerning this supplement, please contact your SCO software supplier or your SCO Support Representative. ---------------------------------------------------------- II. Installation Instructions To install OSS711A follow these steps: 1. Login as root 2. Create an empty directory, such as /tmp/oss711a, to which the patch will be downloaded. 3. Download the OSS711A patch file VOL.000.000 from ftp://ftp.sco.com/pub/openserver6/600/patches/oss711 to the directory created in step 2. 4. Run the Software Manager with the command: scoadmin software or double-click on the Software Manager icon in the desktop. 5. Pull down the "Software" menu and select "Install New". 6. When prompted for the host from which to install, choose the local machine and then "Continue". 7. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue". 8. When prompted for the "Image Directory", enter "/tmp/oss711a" (or the directory where you placed the OSS711A patch file VOL.000.000 in step 2) and choose "OK." 9. When prompted to select software to install, make sure that the "OSS711A" entry is highlighted. Choose "Install". 10. Installation of Escalation Supplement OSS711A is now complete. To exit the Software Manager, select "Exit" from the "Host" menu. 11. Once the installation has completed, you can remove or archive the OSS711A patch file VOL.000.000 and the containing directory created in step 2. 12. You will need to reboot your system for all changes to take effect. ---------------------------------------------------------- III. Removal Instructions Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis. 1. Log in as root. 2. Execute the command: scoadmin software or double-click on the Software Manager icon in the desktop. 3. Highlight the "OSS711A" entry. 4. Pull down the "Software" menu and select "Remove Software". 5. Once the removal finishes, quit the Software Manager. 6. You will need to reboot your system for all changes to take effect.