What is Support Level Supplement (SLS) OSS710A, the OpenServer 6.0.0 Xenix Compatibility Update? KEYWORDS: oss710 oss710a openserver osr6 6.0.0 maintenance pack 3 patch supplement escalations xenix emulator xemul xrun fcntl file lock open file table osr5 openserver5 compatibility fz534656 fz534637 fz534743 fz534761 fz534762 RELEASE: SCO OpenServer 6.0.0 PROBLEM: What problem is fixed by Escalations Supplement OSS710A, the OpenServer 6.0.0 Xenix Compatibility Update? SOLUTION: OSS701A, the OpenServer 6.0.0 Xenix Compatibility update fixes the following problems: Some locking calls from Xenix applications failed because the Xenix emulator failed to set the return value to 0 in some cases. The problem has been fixed. Some fcntl and locking calls from Xenix applications failed because both the Xenix emulator and the kernel converted Xenix-domain values into the native SVR5-ABI domain. This sometimes resulted in double conversions, in turn causing erroneous values to be used in some file locking system calls. This problem caused several applications, including FoxBase+, that worked prior to the installation of Maintenance Pack 3 (MP3) to fail. The problem has been fixed by performing these translations only in the Xenix emulator. An error in the management of the open file table maintained by the Xenix emulator on behalf of Xenix applications caused some Xenix applications to fail. This problem affected file descriptors that had been duped or had been created by duping another file descriptor. This problem has been fixed. This supplement can be installed on the following SCO OpenServer releases: SCO OpenServer Release 6.0.0 with Maintenance Pack 3 ---------------------------------------------------------- I. Software Notes and Recommendations 1. If you have any questions concerning this supplement, please contact your SCO software supplier or your SCO Support Representative. ---------------------------------------------------------- II. Installation Instructions To install OSS710A follow these steps: 1. Login as root 2. Create an empty directory, such as /tmp/oss710a, to which the patch will be downloaded. 3. Download the OSS710A patch file VOL.000.000 to the directory created in step 2. 4. Run the Software Manager with the command: scoadmin software or double-click on the Software Manager icon in the desktop. 5. Pull down the "Software" menu and select "Install New". 6. When prompted for the host from which to install, choose the local machine and then "Continue". 7. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue". 8. When prompted for the "Image Directory", enter "/tmp/oss710a" (or the directory where you placed the OSS710A patch file VOL.000.000 in step 2) and choose "OK." 9. When prompted to select software to install, make sure that the "OSS710A" entry is highlighted. Choose "Install". 10. Installation of Escalation Supplement OSS710A is now complete. To exit the Software Manager, select "Exit" from the "Host" menu. 11. Once the installation has completed, you can remove or archive the OSS710A patch file VOL.000.000 and the containing directory created in step 2. 12. You will need to reboot your system for all changes to take effect. ---------------------------------------------------------- III. Removal Instructions Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis. 1. Log in as root. 2. Execute the command: scoadmin software or double-click on the Software Manager icon in the desktop. 3. Highlight the "OSS710A" entry. 4. Pull down the "Software" menu and select "Remove Software". 5. Once the removal finishes, quit the Software Manager. 6. You will need to reboot your system for all changes to take effect.