What is Support Level Supplement (SLS) OSS708A, the OpenServer 6 Processor Licensing Update? KEYWORDS: sls oss oss708 oss708a 600 6.0.0 openserver osr6 maintenance pack 3 patch supplement escalations processor licensing RELEASE: SCO OpenServer Release 6.0.0 with Maintenance Pack 3 PROBLEM: What problems are fixed by Support Level Supplement (SLS) OSS708A, the OpenServer 6 Processor Licensing Update? SOLUTION: OSS708A eliminates the need for additional CPU and CPU Trade-In Licenses for OpenServer 6 by enabling as many CPUs as the OS supports regardless of what processor licenses have been applied. Currently, the OS will support up to 32 logical CPUs, i.e., 32 single, 16 dual, or 8 quad core. This supplement can be installed on the following SCO OpenServer releases: SCO OpenServer Release 6.0.0 with Maintenance Pack 3 ---------------------------------------------------------- I. Software Notes and Recommendations 1. If you have any questions concerning this supplement, please contact your SCO software supplier or your SCO Support Representative. ---------------------------------------------------------- II. Installation Instructions To install OSS708A follow these steps: 1. Login as root 2. Create an empty directory, such as /tmp/oss708a, to which the patch will be downloaded. 3. Download the OSS708A patch file VOL.000.000 from ftp://ftp.sco.com/pub/openserver6/600/patches/oss708a to the directory created in step 2. 4. Run the Software Manager with the command: scoadmin software or double-click on the Software Manager icon in the desktop. 5. Pull down the "Software" menu and select "Install New". 6. When prompted for the host from which to install, choose the local machine and then "Continue". 7. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue". 8. When prompted for the "Image Directory", enter "/tmp/oss708a" (or the directory where you placed the OSS708A patch file VOL.000.000 in step 2) and choose "OK." 9. When prompted to select software to install, make sure that the "OSS708A" entry is highlighted. Choose "Install". 10. Once installation of SLS OSS708A has completed, exit the Software Manager by selecting "Exit" from the "Host" menu. 11. If desired, remove or archive the downloaded patch file and remove the containing directory created in step 2. 12. You will need to reboot your system for all changes to take effect. ---------------------------------------------------------- III. Removal Instructions Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis. 1. Log in as root. 2. Execute the command: scoadmin software or double-click on the Software Manager icon in the desktop. 3. Highlight the "OSS708A" entry. 4. Pull down the "Software" menu and select "Remove Software". 5. Once the removal finishes, quit the Software Manager. 6. You will need to reboot your system for all changes to take effect.