What is Support Level Supplement (SLS) OSS707A, the OpenServer 6 Platform Support Update? KEYWORDS: sls oss oss707 oss707a 600 6.0.0 openserver osr6 maintenance pack 2 patch supplement escalations platform support LAPIC_SORT licensed processors hyperthread multicore unrecognized cores fz534338 RELEASE: SCO OpenServer Release 6.0.0 with Maintenance Pack 2 PROBLEM: What problems are fixed by Support Level Supplement (SLS) OSS707A, the OpenServer 6 Platform Support Update? SOLUTION: OSS707A fixes the following two problems related to multicore and hyperthread support: 1. The LAPIC_SORT=Y boot directive was ignored, which in some cases could result in not all processors being detected by the OS. 2. Systems on which the processor supports hyperthreading but on which the BIOS has hyperthreading disabled may have the number of available processors reduced by a factor of 2. This supplement can be installed on the following SCO OpenServer releases: SCO OpenServer Release 6.0.0 with Maintenance Pack 2 and OSS706C, the OpenServer 6 Maintenance Pack 2 Supplement ---------------------------------------------------------- I. Software Notes and Recommendations 1. If you have any questions concerning this supplement, please contact your SCO software supplier or your SCO Support Representative. ---------------------------------------------------------- II. Installation Instructions To install OSS707A follow these steps: 1. Login as root 2. Create an empty directory, such as /tmp/oss707a, to which the patch will be downloaded. 3. Download the OSS707A patch file VOL.000.000 from ftp://ftp.sco.com/pub/openserver6/600/patches/oss707a to the directory created in step 2. 4. Run the Software Manager with the command: scoadmin software or double-click on the Software Manager icon in the desktop. 5. Pull down the "Software" menu and select "Install New". 6. When prompted for the host from which to install, choose the local machine and then "Continue". 7. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue". 8. When prompted for the "Image Directory", enter "/tmp/oss707a" (or the directory where you placed the OSS707A patch file VOL.000.000 in step 2) and choose "OK." 9. When prompted to select software to install, make sure that the "OSS707A" entry is highlighted. Choose "Install". 10. Once installation of SLS OSS707A has completed, exit the Software Manager by selecting "Exit" from the "Host" menu. 11. If desired, remove or archive the downloaded patch file and remove the containing directory created in step 2. 12. You will need to reboot your system for all changes to take effect. ---------------------------------------------------------- III. Removal Instructions Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis. 1. Log in as root. 2. Execute the command: scoadmin software or double-click on the Software Manager icon in the desktop. 3. Highlight the "OSS707A" entry. 4. Pull down the "Software" menu and select "Remove Software". 5. Once the removal finishes, quit the Software Manager. 6. You will need to reboot your system for all changes to take effect.