What is Support Level Supplement (SLS) OSS703a, the X Server Upgrade for OpenServer 6.0.0 Maintenance Pack 2? KEYWORDS: sls oss oss703 oss703a 600 6.0.0 openserver osr6 MP2 patch supplement X Matrox ProLiant ML150 G3 GUI VESA mga graphics RELEASE: SCO OpenServer Release 6.0.0 PROBLEM: The X Server display does not start on some platforms that use the Matrox G200E graphics chipset from ServerEngines. The HP Proliant ML150 G3 is one such platform. SOLUTION: OSS703A enables the X Server display to work on platforms that use the Matrox G200E graphics chipset from ServerEngines. NOTE: OSS703 should only be installed on: OpenServer 6.0.0 with Maintenance Pack 2 (MP2) Installation Instructions -------------------- To install OSS703A follow these steps: 1. Download the OSS703A media image file from: ftp://ftp.sco.com/openserver6/600/patches/oss703a 2. Place the files in the /tmp directory. 3. Run the Software Manager with the command: # scoadmin software 4. Pull down the "Software" menu and select "Install New". 5. When prompted for the host from which to install, choose the local machine and then "Continue". 6. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue". 7. When prompted for the "Image Directory", enter "/tmp (or the directory where you placed the VOL files in step 2) and choose "OK". 8. When prompted to select software to install, make sure that the "OSS703A" entry is highlighted. Choose "Install". 9. Installation of SLS OSS703A is now complete. To exit the Software Manager, select "Exit" from the "Host" menu. 10. Configure the video adapter by following these steps below: (NOTE: If the X server is already running, run "scologin stop" first.) Run: # /usr/X11R6/bin/X -configure This command detects the video adapter and creates a basic X11 server configuration file, named xorg.conf.new, to load the appropriate video drivers for your hardware. This file is created in the root directory. To test that this configuration file works, run: # /usr/X11R6/bin/X -config /xorg.conf.new Your screen should display a black and white grid pattern and an X mouse cursor. To exit the test, press . If the test fails, run the Video Configuration Manager to configure your video adapter. If the test of the X11 server configuration file is successful, copy the xorg.conf.new file to /etc/xorg.conf. Start the the X display manager scologin(XC) with the command: # scologin start This starts the X server on tty02. Alternatively, you may reboot the system. To modify your video configuration, if required, run the Video Configuration Manager. Removal Instructions -------------------- Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis. 1. Log in as root. 2. Stop the X server if it is running with the command # scologin stop 3. Execute the command: # scoadmin software 4. Highlight the "OSS703A" entry. 5. Pull down the "Software" menu and select "Remove Software". 6. Once the removal finishes, quit the Software Manager. Removal of SLS OSS703A is now complete.