What is oss702B, the OpenServer 6.0.0 pkgadd Supplement? KEYWORDS: sls oss oss702 oss702b 600 6.0.0 openserver osr6 patch supplement pkgadd fz532887 fz532895 fz532013 fz533126 fz533239 installf pkgtrans RELEASE: SCO OpenServer Release 6.0.0 PROBLEM: What problems are fixed by Support Level Supplement (SLS) OSS702B, the OpenServer 6.0.0 pkgadd Supplement for OpenServer 6.0.0 with MP1 applied? SOLUTION: OSS702B addresses the following problems: - fz533239: Get installf errors installing HBAs. - fz533126: package installation scripts were not able to find binaries in /etc directory. - pkgtrans as non-root user fails with the following message: /dev/resmgr: Permission denied. - pkgadd -d diskette1 fails with: UX:pkgadd: ERROR: processing of media inserted in diskette1 failed. Please check if the correct media is inserted. OSS702B also addresses the following problems that we also addressed in OSS702A: - fz532887: When removing a package from a system with MP1 applied you get the error: : is not an identifier UX:pkgremove: WARNING: e-mail notification may have failed - fz532895: installf -f fails with the error: installf: ERROR: bad entry read in contents file pathname=/tmp problem=illegal value for mode UX:pkginstall: ERROR: postinstall script did not complete successfully. - fz532013: Added UnixWare 7.1.4 features to the pkgadd toolset - pkginstall command coredumps. - package installation scripts were not able to find binaries like ls(C), cp(C) etc This supplement can be installed on the following SCO OpenServer releases: SCO OpenServer Release 6.0.0 with Maintenance Pack 1 ---------------------------------------------------------- I. Software Notes and Recommendations 1. If you have any questions concerning this supplement, please contact your SCO software supplier or your SCO Support Representative. ---------------------------------------------------------- II. Installation Instructions NOTE: OSS702B can be installed on top of OSS702A. There is no need to remove OSS702A prior to the application of OSS702B. To install OSS702B follow these steps: 1. Download the OSS702B media image file from: ftp://ftp.sco.com/pub/openserver6/600/patches/oss702b 2. Place the files in the /tmp directory. 3. Run the Software Manager with the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 4. Pull down the "Software" menu and select "Install New". 5. When prompted for the host from which to install, choose the local machine and then "Continue". 6. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue". 7. When prompted for the "Image Directory", enter "/tmp" (or the directory where you placed the VOL files in step 2) and choose "OK". 8. When prompted to select software to install, make sure that the "OSS702B" entry is highlighted. Choose "Install". 9. Installation of SLS OSS702B is now complete. To exit the Software Manager, select "Exit" from the "Host" menu. ---------------------------------------------------------- III. Removal Instructions Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis. 1. Log in as root. 2. Execute the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 3. Highlight the "OSS702B" entry. 4. Pull down the "Software" menu and select "Remove Software". 5. Once the removal finishes, quit the Software Manager. Removal of SLS OSS702B is now complete.