Dear SCO Customer, Support Level Supplement (SLS) OSS663A, the LPD supplement for OpenServer 5.0.6 with OSS646, addresses a problem that occures when either OSS646a or OSS646b is installed on an OpenServer 5.0.6 system with lpd printers defined. With OSS646 installed, lpd has a problem parsing /etc/printcap and that results in a lot of entries in the syslog about unknown printer, similar to this: Jul 24 15:16:27 scosysv lpd[9160]: unknown printer: 026 SLS OSS663A contains this file: /usr/lib/lpd Software Notes and Recommendations ---------------------------------- SLS OSS663A should only be installed on: SCO OpenServer Release 5.0.6 with Release Supplement 506A (rs506a) and OSS646 Installation Instructions ------------------------- 1. Download the OSS663A media image file from: ftp://ftp.caldera.com/pub/openserver5/oss663a Place the file in the /tmp directory, and rename the file by typing the command: mv /tmp/oss663a /tmp/VOL.000.000 2. Run the Software Manager with the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 3. Pull down the "Software" menu and select "Install New". 4. When prompted for the host from which to install, choose the local machine and then "Continue". In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue". 6. When prompted for the "Image Directory", enter "/tmp" (or the directory where you placed the VOL file in step 1) and choose "OK". 7. When prompted to select software to install, make sure that the "OSS663A" entry is highlighted. Choose "Install". 8. Installation of SLS OSS663A is now complete. To exit the Software Manager, select "Exit" from the "Host" menu. 9. A kernel relink occurred during this process and it will be necessary to reboot the server for the supplement to take effect. Removal Instructions -------------------- Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis. To remove SLS OSS663A from SCO OpenServer 5.0.6, follow these steps: 1. Log in as root. 2. Execute the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 3. Highlight "OSS663A: Processor Supplement for OpenServer 5.0.6". 4. Pull down the "Software" menu and select "Remove Software". 5. Once the removal finishes, quit the Software Manager. Removal of SLS OSS663A is now complete. 6. A kernel relink occurred during this process and it will be necessary in order to reboot the server. If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.