Dear SCO Customer, Support Level Supplement (SLS) OSS660A, the getty Supplement for OpenServer 5.0.6, addresses the following problem: OSS660A provides a new version of getty that has been changed in two ways. First, it includes a new option, -r, which prevents it from dropping DTR and resetting the termio modes at startup. This option is not normally needed, because getty is normally responsible for opening the line and initializing the termio parameters. However, some third-party applications use getty in an alternate manner: they wait for incoming calls, initialize the termio parameters, and then invoke getty to initiate a login session. In this case, to avoid dropping connections when getty is invoked, the -r option should be used by editing both /etc/inittab and the appropriate file under /etc/conf/init.d (for standard serial ports, /etc/conf/init.d/sio) and adding the -r option to the getty lines that should have their behavior modified. The second change is to make getty operate correctly when used by ct. No changes (beyond installing the new getty) are needed to enable this functionality. Software Notes and Recommendations ---------------------------------- SLS OSS650A can be installed on: SCO OpenServer Release 5.0.6 with Release Supplement 506A (rs506a) Installation Instructions ------------------------- 1. Download the OSS660A media image file from: ftp://ftp.sco.com/pub/openserver5/oss660a Place the file in the /tmp directory, and rename the file by typing the command: mv /tmp/oss660a /tmp/VOL.000.000 2. Run the Software Manager with the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 3. Pull down the "Software" menu and select "Install New". 4. When prompted for the host from which to install, choose the local machine and then "Continue". 5. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue". 6. When prompted for the "Image Directory", enter "/tmp" (or the directory where you placed the VOL file in step 1) and choose "OK". 7. When prompted to select software to install, make sure that the "OSS660A" entry is highlighted. Choose "Install". 8. Installation of SLS OSS660A is now complete. To exit the Software Manager, select "Exit" from the "Host" menu. Removal Instructions -------------------- Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis. To remove SLS OSS650A from SCO OpenServer 5.0.6, follow these steps: 1. Log in as root. 2. Execute the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 3. Highlight "OSS660A: getty Supplement". 4. Pull down the "Software" menu and select "Remove Software". 5. Once the removal finishes, quit the Software Manager. Removal of SLS OSS660A is now complete. If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.