Dear SCO Customer, Support Level Supplement (SLS) OSS649A, the idscsi Update for OpenServer 5.0.5, addresses the following problem: On a system with an Adaptec Ultra 160 controller, while relinking the kernel after running 'mkdev tape' the following error occurs: "conf.c", line 1614: illegal character: 001 (0ctal) "conf.c", line 1614: cannot recover from earlier errors: goodbye! ERROR: conf.c will not compile properly /var/opt/K/SCO/link/1.1Eb/etc/conf/pack.d/ad160/space.c: 42 Illegal character in preprocessor SLS OSS649A contains these files: /etc/conf/bin/idscsi Software Notes and Recommendations ---------------------------------- SLS OSS649A should only be installed on: SCO OpenServer Release 5.0.5 Installation Instructions ------------------------- 1. Download the OSS649A media image file from: ftp://ftp.sco.com/pub/openserver5/oss649a Place the file in the /tmp directory, and rename the file by typing the command: # mv /tmp/oss649a /tmp/VOL.000.000 2. Run the Software Manager with the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 3. Pull down the "Software" menu and select "Install New". 4. When prompted for the host from which to install, choose the local machine and then "Continue". 5. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue". 6. When prompted for the "Image Directory", enter "/tmp" (or the directory where you placed the VOL file in step 1) and choose "OK". 7. When prompted to select software to install, make sure that the "OSS649A" entry is highlighted. Choose "Install". 8. Installation of SLS OSS649A is now complete. To exit the Software Manager, select "Exit" from the "Host" menu. Removal Instructions -------------------- Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis. To remove SLS OSS649A from SCO OpenServer 5.0.5, follow these steps: 1. Log in as root. 2. Execute the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 3. Highlight "OSS649A: idscsi Update for OpenServer 5.0.5(ver 1.0.0)". 4. Pull down the "Software" menu and select "Remove Software". 5. Once the removal finishes, quit the Software Manager. Removal of SLS OSS649A is now complete. If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.