Dear Caldera Customer, Support Level Supplement (SLS) OSS644B, the Reboot Supplement for OpenServer 5, provides support for an alternative means to reset the system for reboot (init 6). SLS OSS644B corrects the following problem: On certain platforms, the system will hang after receiving the 'init 6' or 'shutdown -i6' command. The following platforms are known to display this behavior: IBM Intellistation M Pro (6868-xxx) IBM Intellistation Z Pro (6866-xxx) IBM NetVista A40 (6578-xxx, 6648-xxx, 6568-xxx) IBM NetVista A40p (6579-xxx, 6649-xxx, 6569-xxx) IBM NetVista X40 (6643-xxx) IBM NetVista X40i (2179-xxx) SLS OSS644B replaces the following files: /etc/conf/pack.d/kernel/space.c /etc/conf/pack.d/kernel/os.a Software Notes and Recommendations ---------------------------------- SLS OSS644B should only be installed on: SCO OpenServer Release 5.0.6 SCO OpenServer Release 5.0.5 SCO OpenServer Release 5.0.4 Installation Instructions ------------------------- 1. Prepare the media for installation. Download the OSS644B media image file (oss644b file), place the file in the /tmp directory and rename the file by typing these commands: mv /tmp/oss644b /tmp/VOL.000.000 2. Run the Software Manager with the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 3. Pull down the "Software" menu and select "Install New". 4. When prompted for which host to install from, choose the local machine and then "Continue". 5. When prompted to select the media device, choose "Media Images, then "Continue". When prompted for the "Image Directory", enter "/tmp" (or the directory where you placed the VOL file), and then select "OK". (If you are installing this SLS from diskette media, select the appropriate floppy disk drive and then "Continue". Proceed to step 6.) 6. When prompted to select software to install, ensure that the "OSS644B" entry is highlighted. Choose "Install". 7. Once the installation finishes, quit the Software Manager. Installation of SLS OSS644B is now complete. The changes will take effect the next time you reboot the system. 8. Log in as root on tty01, and shut down the system: # shutdown -g0 -y After shutting down and rebooting the machine, application of the SLS is complete. Removal Instructions -------------------- Notes: Patches must be rolled back in the reverse order in which they were installed on a per-component basis. 1. Log in as root. 2. Execute the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 3. Highlight "OSS644B - Reboot Supplement for OpenServer 5 (ver 1.0.0)". 4. Pull down the "Software" menu and select "Remove Software". 5. Once the removal finishes, quit the Software Manager. 6. As root on tty01, shut down the system: # shutdown -g0 -y After shutting down and rebooting the machine, removal of the SLS is complete. If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.