Dear Caldera Customer, Support Level Supplement (SLS) OSS640A, the BIND Update, fixes security problems in older versions of BIND, and provides the latest OpenServer version of BIND. Software Notes and Recommendations ---------------------------------- SLS OSS640A is intended for use on these products: OpenServer Release 5.0.5 OpenServer Release 5.0.6 OpenServer Release 5.0.6A Installation Instructions ------------------------- 1. Prepare the media for installation Download the OSS640A VOL files from the pub/openserver5/oss640a directory on Caldera's ftp site. Place the files in the /tmp directory on the local system. The files should include: VOL.000.000 VOL.001.000 oss640a.ltr 2. Run the Software Manager with the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 3. Pull down the "Software" menu and select "Install New". 4. When prompted for the host from which to install, choose the local machine and then "Continue". 5. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue". 6. When prompted for the "Image Directory", enter "/tmp" (or the directory where you placed the VOL file in step 1) and choose "OK". 7. When prompted to select software to install, make sure that the "OSS640A: BIND Update" entry is highlighted. Choose "Install". 8. Installation of SLS OSS640A is now complete. To exit the Software Manager, select "Exit" from the "Host" menu. Removal Instructions -------------------- Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis. That is, if OSS640A - the BIND Update - is not the most recent patch applied to the UNIX component of the product, you will have to roll back all patches applied after OSS640A prior to rollback of OSS640A. To remove SLS OSS640A, take these steps: 1. Log in as root. 2. Execute the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 3. Highlight "OSS640A: BIND Update". 4. Pull down the "Software" menu and select "Remove Software". 5. Once the removal finishes, quit the Software Manager. Removal of SLS OSS640A is now complete. If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.