Dear SCO Customer, Support Level Supplement (SLS) OSS621B, the OpenServer 5.0.4/5.0.5 libc Supplement, provides an updated libc library to correct the following OpenServer problems: 1. The underlying text-to-float conversion function used by atof(S), strtod(S), the scanf(S) family, and other similar functions, was corrected. Previously, incorrect results were produced for a few floating point numbers with many digits after the decimal point. 2. A problem in getgrent(S) was corrected. Previously, members were occasionally omitted from some groups when any group had more than 16 members. 3. A revision was made to prevent usleep(S) from generating spurious SIGALRM signals to the calling process and to prevent race conditions. usleep now uses select(S) rather than setitimer(S). 4. strlcat(S) and strlcpy(S) length-terminated string functions were added. These provide cleaner, clearer manipulation of length-specified strings. The interface specification and idea of these functions were derived from the OpenBSD operating system. 5. A runtime linker error message that can be encountered when attempting to load a UnixWare shared object was corrected. Previously, the message incorrectly used the old internal name "Gemini" rather than "UnixWare". 6. Non-removable embedded object stamps were deleted from the index(S), killpg(S), rindex(S), and strcasecmp() functions. This cumulative SLS includes libc fixes previously deployed in OpenServer 5.0.5 and various OpenServer 5.0.4 and 5.0.5 SLSs, specifically: 1. The libc fixes previously available in OpenServer 5.0.5 via SLS OSS600A, including previous fixes for Y2K compliance. See ta110079, "What is SLS OSS600A, the Y2K SLS for SCO OpenServer 5.0.5 + RS505A?" for a full listing. 2. The libc fixes previously available in OpenServer 5.0.5 via Release Supplement 505A. See ta109909, "What is Release Supplement 505A for SCO OpenServer Release 5.0.5?" for a full listing. 3. The libc fixes from OSS472A and OSS601A for OpenServer 5.0.4; these fixes were part of OpenServer Release 5.0.5 without any supplements. Specific fixes include: + OpenServer ELF binaries created with certain non-SCO development systems could fail with the message: dynamic linker: : symbol not found: _init_features_vector This change was previously available as SLS OSS472A, which is completely incorporated into this SLS. + A new function, signalnull(), was added to control the behavior of ELF binaries attempting to read the first 4KB of their address space. By default, the kernel silently supplies a read-only page of zeroes. An ELF process that calls signalnull(1) will instead receive SIGSEGV if it attempts to read from addresses below 4KB. This can also be controlled on a system-wide basis by the /etc/conf/pack.d/kernel/space.c variables notice_null_refs and signal_null_refs. Both COFF and ELF processes always receive SIGSEGV if they _write_ to the first 4KB. COFF processes do not receive SIGSEGV for reading the first 4KB, since the beginning of a COFF binary's .text is mapped there. + snprintf(S) would zero the first character of the output buffer if the total string length to be printed was too long for the buffer. + A file descriptor leak in getlogin(S) was corrected. Software Notes and Recommendations ---------------------------------- SLS OSS621B should only be installed on: SCO OpenServer Release 5.0.5 with Release Supplement 505A (rs505a) and SLS OSS600A (Y2K SLS for SCO OpenServer 5.0.5 + rs505a). OR SCO OpenServer Release 5.0.4 with Release Supplement 504C (rs504c) and SLS OSS601A (Y2K SLS for SCO OpenServer 5.0.4 + rs504c). If installed, the previous version of this supplement, OSS621A, must be removed before installing this OSS621B. If you already have OSS621A installed on your system: This version of the supplement (OSS621B) supplies both the dynamic libc library and the static libc library for all SCO OpenServer 5.0.4 and SCO OpenServer 5.0.5 systems. For SCO OpenServer 5.0.4 and 5.0.5 systems without the Development System installed, OSS621A and OSS621B are functionally equivalent. SCO OpenServer 5.0.4 users with the SCO OpenServer Development System installed should note that OSS621A only installed the dynamic libc library and not the static libc library. OSS621B installs both libraries. To upgrade to OSS621B, first remove OSS621A and then install OSS621B. Installation Instructions ------------------------- 1. Download the OSS621B media image file (oss621b file), place the file in the /tmp directory and rename the file by typing these commands: cd /tmp mv oss621b VOL.000.000 2. Run the Software Manager with the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 3. If the previous version of this SLS, OSS621A, is _not_ installed, proceed to step 4. If SLS OSS621A is already installed, remove it: Select the "OSS621A - libc Supplement" entry, then pull down the "Software" menu and select "Remove Software". 4. Install OSS621B: Pull down the "Software" menu and select "Install New". 5. When prompted for the host from which to install, choose the local machine and then "Continue". 6. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue". 7. When prompted for the "Image Directory", enter "/tmp" (or the directory where you placed the VOL file in step 1 and choose "OK". 8. When prompted to select software to install, make sure that the "OSS621B" entry is highlighted. Choose "Install". 9. Installation of SLS OSS621B is now complete. To exit the Software Manager, select "Exit" from the "Host" menu. Removal Instructions -------------------- Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis. That is, if OSS621B, the OpenServer 5.0.4/5.0.5 libc Supplement, is not the most recent patch applied to the UNIX component of the product, you will have to roll back all patches applied after OSS621B prior to rollback of OSS621B. To remove SLS OSS621B from SCO OpenServer 5.0.4 and 5.0.5, take these steps: 1. Log in as root. 2. Execute the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 3. Highlight "OSS621B - libc Supplement". 4. Pull down the "Software" menu and select "Remove Software". 5. Once the removal finishes, quit the Software Manager. Removal of SLS OSS621B is now complete. If you have questions about this SLS, or the product on which it is installed, please contact your software supplier.