Dear SCO Customer, Support Level Supplement (SLS) OSS615A, the SCO Merge 5 Kernel Update, provides updated CD-ROM and floppy diskette drivers as well as an updated license manager required by SCO Merge 5. Installation Instructions ------------------------- 1. Download the OSS615A media image file (oss615a), place the file in the /tmp directory and rename the file by typing these commands: mv /tmp/oss615a /tmp/VOL.000.000 2. Run the Software Manager with the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 3. Pull down the "Software" menu and select "Install New". 4. When prompted for which host to install from, choose the local machine and then "Continue". 5. When prompted to select the media device: If you are installing this SLS from diskette media, select the appropriate floppy disk drive and then "Continue". Proceed to step 6. If you are installing this SLS from media images per step 1, select "Media Images", then "Continue". When prompted for the "Image Directory", enter "/tmp" (or the directory where you placed the VOL file in step 1, and then select "OK". 6. When prompted to select software full or partial installation, choose "Full". 7. During installation of OSS615A, a new kernel is built with the new CD-ROM and floppy diskette drivers. The changes to these drivers will not take effect until you reboot the system. 8. Log in as root on tty01, and shut down the system: # shutdown -g0 -y After shutting down and rebooting the machine, application of the SLS is complete. Removal Instructions -------------------- Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis. SLS OSS615A, the SCO Merge 5 Kernel Update, consists of a patch to the SCO Unix component. If this component was patched after SLS OSS615A was installed, then you will have to roll back the later patch before you can roll back the SLS OSS615A patch. 1. Log in as root. 2. Execute the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 3. Highlight "OSS615A: SCO Merge 5 Update". 4. Pull down the "Software" menu and select "Remove Software". 5. Once the removal finishes, quit the Software Manager. Removal of SLS OSS615A is now complete. You must reboot your system for the removal to take effect. 6. As root on tty01, shut down the system: # shutdown -g0 -y After shutting down and rebooting the machine, removal of the SLS is complete. If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.