Dear SCO Customer, Support Level Supplement (SLS) OSS480A, the HTFS Supplement for OpenServer 5.0.4, provides a new HTFS driver that resolves the following known problems with the HTFS filesystem on SCO OpenServer Release 5.0.4: - Extremely slow performance on HTFS filesystems of 18GB or greater containing large numbers of files - PANIC: HTFS: Trap type E in htdirbread INSTALLATION AND REMOVAL INSTRUCTIONS I. PRIOR TO INSTALLING SLS OSS480A Ensure that the SCO OpenServer Release Supplement 5.0.4c (rs504c) has been applied on the system BEFORE loading and applying this SLS. Release Supplement 5.0.4c can be downloaded from the SCO Online Support (SOS) system. The relevant ftp site is: ftp://ftp.sco.com/Supplements/rs504c You can also access this same site via the SCO web site http://www.sco.com; downloadable software from SCO Services can be viewed and chosen at: http://www.sco.com/support/ftplists/osr5list.html II. INSTALLING SLS OSS480A 1. Prepare the media for installation. Download the OSS480A media image file (oss480a.Z), place the file in the /tmp directory, uncompress and and rename the file by typing the following commands: uncompress /tmp/oss480a.Z mv /tmp/oss480a /tmp/VOL.000.000 2. Run the Software Manager with the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 3. Pull down the "Software" menu and select "Install New". 4. When prompted for the host from which to install, choose the local machine and then "Continue". 5. When prompted to select the media device: If you are installing this SLS from diskette media, select the appropriate floppy disk drive and then "Continue". Proceed to step 6. If you are installing this SLS from media images per step 1, select "Media Images", then "Continue". When prompted for the "Image Directory", enter "/tmp" (or the directory where you placed the VOL file in step 1) and then select "OK". 6. When prompted to select software to install, ensure that the "HTFS Supplement for OpenServer 5.0.4" entry is highlighted. Choose "Install". 7. Once the installation finishes, quit the Software Manager. Installation of OSS480A is now complete. You must reboot your system for these changes to take effect. III. REMOVING SLS OSS480A Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis. The HTFS Supplement for OpenServer 5.0.4 (OSS480A) consists of a patch to the SCO link-kit component. If this component was patched after OSS480A was installed, then you will have to roll back the later patch before you can roll back the SLS OSS480A patch. 1. Log in as root. 2. Execute the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 3. Highlight "The HTFS Supplement for OpenServer 5.0.4". 4. Pull down the "Software" menu and select "Remove Software". 5. Once the removal finishes, quit the Software Manager. Removal of SLS OSS480A is now complete. You must reboot your system for the removal to take effect. If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier. We appreciate your business. SCO Support Services