Dear SCO Customer, The enclosed Support Level Supplement, (SLS) OSS438A, the Symbolic Link and Long File Name Supplement, corrects a problem with accessing symlinks whose link contents are exactly 128 characters long. The error when opening such a file is: "cannot open : No such file or directory (error 2)" where is the name of the file being accessed. To re-create the scenario, a file needs to be created where the contents, including directory path, are exactly 128 characters long. It must then be symlinked to any filename of any length. If you try to access this symlinked file you will get the above error. INSTALLATION AND REMOVAL INSTRUCTIONS Installing patches on SCO OpenServer 5.0.0 and 5.0.2 usually consists of two phases: "Loading" and "Applying". The instructions that follow enable you to both install the patch from distribution media or media image, as well as configure the patch to be installed from a remote SCO OpenServer 5.0.0 or 5.0.2 system over a TCP/IP network. I. BEFORE LOADING THE PATCH Use the Software Manager to check which patches are currently on the system. For OpenServer Release 5.0.0, check to ensure that SCO OpenServer Release 5 Release Supplement 5.0.0d is installed BEFORE installing SLS OSS438A. The SCO OpenServer Release 5 Release Supplement 5.0.0d DOES NOT apply for SCO OpenServer Release 5.0.2. You can safely apply SLS OSS438A on SCO OpenServer Release 5.0.2. More information regarding installation of the Release Supplement may be found in the SCO OpenServer Release Notes. II. LOADING THE PATCH 1. Log in as root. 2. If you are installing this SLS from floppy disk media, skip this step and proceed to step 3. If you are installing this SLS from a media image, there is a file called oss438a.Z. Uncompress this file with this command: # uncompress oss438a.Z Copy the file to the /tmp directory and name it VOL.000.000: # cp oss438a /tmp/VOL.000.000 3. Execute the command: # scoadmin software or double click on the Software Manager icon on the desktop. 4. Pull down the "Software" menu and select "Patch Management-->Load Patch". 5. You will see the "Begin Load Patch" menu. Be sure the local machine name is selected and choose "Continue". 6. You will see the "Select Media" menu. a. If you are loading this SLS from floppy disk media, select the appropriate floppy disk drive and choose "Continue". Proceed to step 7. b. If you are loading this SLS from a media image per step 2, pull down the "Media Device" menu and select "Media Images", then choose "Continue". You will then see the "Enter Image Directory" menu. Enter /tmp and choose "OK". 7. You will see the "Load Patch Preference" menu. Choose "Full". 8. You will see the "Load Patch Progress" window. If the patch loads successfully, you will see a "Message" window which states "Load Patch complete". Choose "OK". You are then returned to the main Software Manager window. 9. To apply the patch now, continue with step 2 under section III, "Applying the Patch". To exit the Software Manager now, select "Exit" from the "Host" menu. III. APPLYING THE PATCH 1. Log in as root. Execute the command: # scoadmin software or double click on the Software Manager icon on the desktop. 2. Pull down the Software menu and select "Patch Management-->Apply Patch". 3. You will see the "Begin Apply Patch" menu. Be sure that the local machine name is selected and choose "Continue". 4. You will see the "Select Media" menu. The "Hard Disk" menu item should already be selected. Choose "Continue". 5. You will be presented with the "Select Patch-product to Apply" menu. Highlight the "Unix Patch OSS438a" patch and then choose "Full" to continue. 6. You will see the "Apply Patch Progress" window as the system applies the patch. 7. You will see this message: NOTE: Application or rollback of this patch requires a kernel relink. If you are applying or rolling back several patches at this time, you may choose to defer the relink until the last patch application or rollback. Do you want to relink the kernel now? (y/n) Enter "y" or "n" based on this message. Note that you will not be able to make use of the patch until you relink the kernel. Therefore, it is suggested that you answer "y" to this question. 8. If you chose "y", the kernel will be relinked. In either case, you will then see: Press to continue After pressing , you will see the "Apply Patch Progress" window, after which you will see a "Message" window stating "Apply Patch Complete". Choose "OK" and you will be returned to the Software Manager's main menu. Exit the Software Manager by choosing "Exit" from the "Host" menu. 9. Log in as root on tty01, and shut down the system: # shutdown -g0 -y After shutting down and rebooting the machine, application of the patch is complete. IV. NOTES ON NETWORK INSTALLATION To install the patch on other SCO OpenServer 5.0 machines over the network, first load the patch as in section II above on a designated installation server. Then create the user "swadmin" on the installation server. When running the Software Manager on the system where the patch will be installed, you will be prompted for the source location of the patch in the "Begin Load Patch" window. Be sure to choose "From Another Host" during this phase. You will need to provide the name of the installation server, as well as the password of the "swadmin" user on the installation server, to initiate the installation process. V. PATCH REMOVAL IMPORTANT NOTE: Patches must be rolled back in the reverse order in which they were installed on a per-component basis. Hence, if the "Unix Patch OSS438a" patch is not the most recent patch applied to the UNIX component of the product, you will have to rollback all patches applied after the "Unix Patch OSS438a" patch prior to rollback of the "Unix Patch OSS438a" patch. 1. Log in as root. 2. Execute the command: # scoadmin software or double click on the Software Manager icon in the desktop. 3. Pull down the "Software" menu and select "Patch Management-->Rollback Patch". 4. You will see the "Begin Rollback Patch" menu, and be asked to select patched software to rollback. Select "SCO UNIX System V Operating System" and choose "Continue". 5. You will see the "Patch Selection" window. Make sure that the "Unix Patch OSS438a" patch is selected, and choose "Continue". 6. You will see the "Confirm Selected Patches" window. Choose "Rollback" to confirm removal of the "Unix Patch OSS438a" patch. 7. You will see the "Rollback Progress" window, as the system performs the rollback of the patch. 8. You will see this message: NOTE: Application or rollback of this patch requires a kernel relink. If you are applying or rolling back several patches at this time, you may choose to defer the relink until the last patch application or rollback. Do you want to relink the kernel now? (y/n) Enter "y" or "n" based on this message. Note that complete rollback of this patch requires a relink of the kernel to be complete. Therefore, it is suggested that you answer "y" to this question, unless you are installing or removing other patches. 9. If you chose "y", the kernel will be relinked. In either case, you will then see: Press to continue After pressing the key, you will see the "Rollback Progress" window, after which a "Message" window stating "Rollback Patch Complete". Choose "OK" and you will be returned to the Software Manager's main menu. Exit the Software Manager by choosing "Exit" from the "Host" menu. 10. Log in as root on tty01, and shut down the system: # shutdown -g0 -y After shutting down and rebooting the machine, rollback of the patch is complete. 11. To also unload the patch, making it no longer available to be applied, follow steps 1 through 10 in this section. However, in step 3, choose: "Patch Management-->Unload Patch" instead of: "Patch Management-->Rollback Patch" If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier. We appreciate your business. SCO Support Services