Dear SCO Customer, The enclosed SCO Internet Supplement for SCO OpenServer 5.0.0/5.0.2 and SCO Internet FastStart 1.0.0/1.1.0 contains the following updates: NOTE: This SCO Internet Supplement (patch id: rs.4.0.b) supersedes the previous versions of the Internet Supplement, rs.4.0.a, and rs.3.9.a. - A new popper (POP3) daemon for better management of user mailboxes. This popper also allows users with UIDs less than 10 to retrieve POP mail. - A patched version of Sendmail 8.6.8 that handles incomplete connections better. - A new License Manager to assist the SCO Internet to Netware Gateway product in recognizing the correct number of users. - A new cpd daemon to allow for greater than 16 connections at one time, if user-band licensing permits. - A new copy of root.cache to reflect a more current set of root-named servers on the Internet. - A new copy of /etc/default/inet to tune TCP/IP for Internet related network traffic. - Several components to support faster speeds for serial modem type devices have been added. This supplement includes all related dialer files. - Some minor changes to NIS to facilitate better utilization of available memory. NOTE: This supplement (patch id: rs.4.0.b) is intended only for SCO systems based on SCO OpenServer 5.0.0, 5.0.2, and SCO Internet FastStart 1.0. and 1.1. It supersedes the previous versions of the SCO Internet Supplement, rs.4.0.a and rs.3.9.a. INSTALLATION AND REMOVAL INSTRUCTIONS Installing patches on SCO OpenServer 5.0.0, 5.0.2, or SCO Internet FastStart 1.0 and 1.1 usually consists of two phases: "Loading" and "Applying". The instructions that follow enable you to both install the patch from distribution media or media image, as well as configure the patch to be installed from a remote SCO OpenServer 5.0.0 , 5.0.2, or Internet FastStart system over a TCP/IP network. I. LOADING THE PATCH 1. Log in as root. 2. If you are installing this supplement from the SCO Server Enhancement Products CD-ROM media, skip this step and proceed to step 3. If you are installing this supplement from a media image, there is a file called VOL.000.000. Copy the file to the /tmp directory. # cp path_where_the_file_exists/VOL.000.000 /tmp 3. Execute the command: # scoadmin software or double click on the Software Manager icon on the desktop. 4. Pull down the "Software" menu and select "Patch Management-->Load Patch". 5. You will see the "Begin Load Patch" menu. Be sure the local machine name is selected and choose "Continue". 6. You will see the "Select Media" menu. a. If you are loading this supplement from SCO Server Enhancement Products CD-ROM media, select the appropriate CD-ROM disk drive and choose "Continue". You will then see the "Select Patch-Product To Load on ... " menu. Select the patch called: SCO Internet Supplement for OpenServer 5.0.0/5.0.2 (rs.4.0.b) Proceed to step 7. b. If you are loading the patch from a media image per step 2, pull down the "Media Device" menu and select "Media Images", then choose "Continue". You will then see the "Enter Image Directory" menu. Enter /tmp and choose "OK". You will see the "Load Patch Preference" menu. Proceed to step 7. 7. Choose "Full" to load the patch. 8. You will see the "Load Patch Progress" window. If the patch loads successfully, you will see a "Message" window which states "Load Patch complete". Choose "OK". You are then returned to the main Software Manager window. 9. To apply the patch now, continue with step 2 under section II, "Applying the Patch". To exit the Software Manager now, select "Exit" from the "Host" menu. II. APPLYING THE PATCH 1. Log in as root. Execute the command: # scoadmin software or double click on the Software Manager icon on the desktop. 2. If you are installing this supplement from CD-ROM media, skip this step and proceed to step 3. If you are installing this supplement from a media image, there is a file called VOL.000.000. Copy the file to the /tmp directory. # cp path_where_the_file_exists/VOL.000.000 /tmp 3. You will see the "Begin Apply Patch" menu. Be sure that the local machine name is selected and choose "Continue". 4. You will see the "Select Media" menu. The "Hard Disk" menu item should already be selected. Choose "Continue". 5. You will be presented with the "Select Patch-product to Apply" menu. Highlight the "SCO Internet Supplement for OpenServer 5.0.0/5.0.2 (ver rs.4.0.b)" patch and then choose "Full" to continue. 6. You will see the "Apply Patch Progress" window as the system applies the patch. If the patch applies successfully you will see a "Message" window that states "Apply Patch complete." Choose "OK". You are then returned to the main Software Manager window. 7. Exit the Software Manager by choosing "Exit" from the "Host" menu. 8. Log in as root on tty01, and shut down the system: # shutdown -g0 -y After shutting down and rebooting the machine, application of the patch is complete. III. NOTES ON NETWORK INSTALLATION To install the patch on other SCO OpenServer 5.0.0, 5.0.2, or Internet FastStart machines over the network, first load the patch as in section I above on a designated installation server. Then create the user "swadmin" on the installation server. When running the Software Manager on the system where the patch will be installed, you will be prompted for the source location of the patch in the "Begin Load Patch" window. Be sure to choose "From Another Host" during this phase. You will need to provide the name of the installation server, as well as the password of the "swadmin" user on the installation server, to initiate the installation process. IV. PATCH REMOVAL NOTE: Patches must be rolled back in the reverse order in which they were installed, on a per-component basis. 1. Log in as root. 2. Execute the command: # scoadmin software or double click on the Software Manager icon in the desktop. 3. Pull down the "Software" menu and select "Patch Management-->Rollback Patch". 4. You will see the "Begin Rollback Patch" menu, and be asked to select patched software to rollback. Select "SCO TCP/IP" and choose "Continue". 5. You will see the "Patch Selection" window. Make sure that the "TCP/IP Component of Internet Supplement" patch is selected, and choose "Continue". 6. You will see the "Confirm Selected Patches" window. Choose "Rollback" to confirm removal of the "TCP/IP Component of Internet Supplement" patch. 7. You will see the "Rollback Progress" window, as the system performs the rollback of the patch. If the patch rollback is successful you will see a "Message" window stating "Rollback Patch Complete". Choose "OK" and you will be returned to the Software Manager's main menu. 8. Pull down the "Software" menu and select "Patch Management-->Rollback Patch". 9. You will see the "Begin Rollback Patch" menu, and be asked to select patched software to roll back. Select "SCO Mail User Agents" and choose "Continue". 10. You will see the "Patch Selection" window. Make sure that the "MailUA Component of Internet Supplement for OpenServer" patch is selected, and choose "Continue". 11. You will see the "Confirm Selected Patches" window. Choose "Rollback" to confirm removal of the "MailUA Component of Internet Supplement for OpenServer" patch. 12. You will see the "Rollback Progress" window, as the system performs the rollback of the patch. If the patch rollback is successful you will see a "Message" window stating "Rollback Patch Complete". Choose "OK" and you will be returned to the Software Manager's main menu. 13. Pull down the "Software" menu and select "Patch Management-->Rollback Patch". 14. You will see the "Begin Rollback Patch" menu, and be asked to select patched software to roll back. Select "SCO UNIX System V Operating System" and choose "Continue". 15. You will see the "Patch Selection" window. Make sure that the "Unix Component of Internet Supplement for OpenServer" patch is selected, and choose "Continue". 16. You will see the "Confirm Selected Patches" window. Choose "Rollback" to confirm removal of the "Unix Component of Internet Supplement for OpenServer" patch. 17. You will see the "Rollback Progress" window, as the system performs the rollback of the patch. If the patch rollback is successful you will see a "Message" window stating "Rollback Patch Complete". Choose "OK" and you will be returned to the Software Manager's main menu. 18. Exit the Software Manager by choosing "Exit" from the "Host" menu. 19. Log in as root on tty01, and shut down the system: # shutdown -g0 -y After shutting down and rebooting the machine, rollback of the patch is complete. 20. To also unload the patch, making it no longer available to be applied, follow steps 1 through 19 in this section. However, in steps 3, 8 and 13, choose: "Patch Management-->Unload Patch" instead of: "Patch Management-->Rollback Patch" If you have questions regarding this supplement, or the product on which it is installed, please contact your software supplier. We appreciate your business. SCO Support Services