Generic VESA BIOS Extension (VBE) graphics driver. KEYWORDS: openserver v5 osr5 video adapters drivers 5.0.4d bus pci 5.0.0 5.0.2 5.0.4 ftp downloadable generic vesa bios extension vbe graphics driver 2.0 1.2 ahs advanced hardware 5.2 supplement s3 virge matrox mystique oss467a boundless maxspeed multiconsole RELEASE: SCO OpenServer Enterprise System Release 5.0.0, 5.0.2, 5.0.4 SCO OpenServer Desktop System Release 5.0.0, 5.0.2, 5.0.4 SCO OpenServer Host System Release 5.0.0, 5.0.2, 5.0.4 HARDWARE: VBE 2.0 Compliant Video Adapters VBE 1.2 Compliant Video Adapters PROBLEM: What video driver can I use to obtain higher resolution and color support greater then standard IBM VGA 640x480 16 colors? NOTE: This driver package is to be installed on: SCO OpenServer 5.0.0: Release Supplement 5.0.0d (rs500d) Networking Supplement 1.0.0 (net100) SCO Advanced Hardware Supplement (AHS) 5.2 in this order. SCO OpenServer 5.0.2: SCO Advanced Hardware Supplement (AHS) 5.2 (available on 5.0.2 CD media) SCO OpenServer 5.0.4: No additional supplements are necessary Supplements are downloadable from ftp.sco.com. You may install the 'Graphics' portion of SCO AHS 5.2 or just the Video Configuration Manager portion to obtain the minimal necessary graphics software to configure this driver. SOLUTION: Use the generic VESA BIOS Extension (VBE) graphics driver. This driver is available at the following URL: ftp://ftp.sco.com/pub/drivers Modification history: - 5.0.4a - created/released vesa driver to BBS. - 5.0.4b - Update vesa driver to work oss467a - Maxspeed and Boundless Multiconsole Supplement. To install this driver, take the following steps: - Log in as root. - Install SCO AHS Release 5.2 if not already installed. This applies to SCO OpenServer 5.0.0 and 5.0.2 only. - Download the volume image(s) to your machine to a directory, for example, /tmp/vol. - Run 'custom' and select 'Install New'. Install from your host machine using 'Media Images'. - Give the directory name where the volume images have been downloaded, for example, /tmp/vol. - Install the hardware into your computer. - Run 'scoadmin video' and select the 'VESA' entry in the list of supported video adapters. If a VESA entry is not available, your system does not have a VBE compliant video adapter. NOTE: Device drivers for listed chip sets are certified to manufacturers' reference circuitry. However, SCO drivers are not tested on all hardware platforms and may not work for supported chip sets in some hardware implementations. If you experience problems with a particular chip set, contact SCO Support Services or your SCO distributor for more information. NOTE: Additional VBE driver details. VBE 2.0 Video Adapters - Support of 256 and 64K colors at resolutions of 640x480 - 1600x1200 ** - A generic framebuffer XDriver is used to display graphics. Because of the generic nature, this driver works on virtually any modern graphics adapter. However, no chipset specific accelerations are provided. Therefor, using high resolutions or high number of colors (eg. 64K) may cause a degradation in performance depending on machine and video adapter speeds. VBE 1.2 Video Adapters - Support of 256 colors (only) at resolutions of 640x480 - 1024x768 ** - A windowed framebuffer XDriver is used to display graphics. Color support is limited to 256 colors only. Resolutions are limited to 1024x768 maximum. The degradations mentioned above apply here too. ** The actual resolutions and number of colors available depends on the video adapter. Recommended mode to use is 1024x768 at 256 colors. Make sure your monitor supports this resolution prior to configuring it.