Driver for Matrox Millennium I and Millennium II based video adapters. KEYWORDS: openserver v5 osr5 matrox millennium 1 2 i ii 519 51b 51f video based adapters drivers 5.0.4d bus pci agp 5.0.0 5.0.2 5.0.4 ahs advanced hardware 5.2 supplement ftp downloadable sni onboard embedded RELEASE: SCO OpenServer Enterprise System Release 5.0.0, 5.0.2, 5.0.4 SCO OpenServer Desktop System Release 5.0.0, 5.0.2, 5.0.4 SCO OpenServer Host System Release 5.0.0, 5.0.2, 5.0.4 HARDWARE: Matrox Millennium I PCI Matrox Millennium II PCI and AGP SNI hardware with Matrox Millennium I PCI SNI hardware with Matrox Millennium II PCI and AGP NOTE: The compatible bus types for this driver are PCI and AGP. PROBLEM: What drivers are available for the Matrox Millennium based video adapters? NOTE: This driver package is to be installed on: SCO OpenServer 5.0.0: Release Supplement 5.0.0d (rs500d) Networking Supplement 1.0.0 (net100) SCO Advanced Hardware Supplement (AHS) 5.2 in this order. SCO OpenServer 5.0.2: SCO Advanced Hardware Supplement (AHS) 5.2 (available on 5.0.2 CD media) SCO OpenServer 5.0.4: No additional supplements are necessary Supplements are downloadable from ftp.sco.com. You may install the 'Graphics' portion of SCO AHS 5.2 or just the Video Configuration Manager portion to obtain the minimal necessary graphics software to configure this driver. SOLUTION: These drivers are available at the following URL: ftp://ftp.sco.com/pub/drivers Modification history: - 5.3.0b Adds support for Matrox Millennium II PCI and AGP adapters. - 5.3.0c Updates video adapter name to denote Millennium I or II. To install these drivers, take the following steps: - Log in as root. - Install SCO AHS Release 5.2 if not already installed. For SCO OpenServer 5.0.0 and 5.0.2 only. - Download the volume image(s) to your machine to a directory, for example, /tmp/vol. - Run 'custom' and select 'Install New'. Install from your host machine using 'Media Images'. - Give the directory name where the volume images have been downloaded, for example, /tmp/vol. - Install the hardware into your computer. - Run 'scoadmin video' and configure the new adapter. WARNING: If you have the "Software Manager Supplement (ver rs504c)" installed on your SCO OpenServer Release 5.0.4 system, you will get the error message: "The custom+ binary (backend) process has died." To work around this problem, do the following. - Run custom again. - The death of custom+ leaves a partially installed version of "The mil graphics driver". Select to remove this driver from the system. - Next, you must remove the _original_ driver from the system before you will be able to install the new one. Double click (expand) "SCO OpenServer Enterprise System", next expand "SCO OpenServer Enterprise System Graphics", next expand "SCO OpenServer Enterprise System Graphics Drivers". Now select "The mil graphics driver" and remove it by selecting "Remove Software..." from the Software menu. A screen will appear prompting to Rollback patches. Select to do this. Now install the new driver according to the instructions above. Replace the word "Enterprise" above with "Desktop" or "Host" for these types of systems.