Drivers for the SMC EtherPower II 9432TX/TXPWR/BTX/FTX and 9434TX_AH 10/100Mbps KEYWORDS: openserver v5 osr5 spwr smc etherpower ethernet controller adapter drivers bus pci 5.0.0 5.0.2 5.0.4 5.0.5 ahs advanced hardware 5.2 supplement ftp downloadable network 9432 -btx -ftx -tx -txpwr 10/100 fiber fast ethernet adapter 9434 tx_ah ftx_ah RELEASE: SCO OpenServer Enterprise System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO OpenServer Desktop System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO OpenServer Host System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO Internet FastStart Release 1.0.0, 1.1.0 HARDWARE: SMC EtherPower II 9432TX rev.0 10/100Mbps SMC EtherPower II 9432TX rev.1 10/100Mbps SMC EtherPower II 9432TXPWR 10/100Mbps SMC EtherPower II 9432TX_AH 10/100Mbps SMC EtherPower II 9432BTX rev.1 10/100Mbps SMC EtherPower II 9432FTX rev.1 10/100Mbps SMC EtherPower II 9432FTX_SC 10/100Mbps SMC EtherPower II 9432FTX_AH 10/100Mbps SMC EtherPower II 9432BTX rev.0 10/100Mbps SMC EtherPower II 9432BTX rev.1 10/100Mbps SMC EtherPower II 9432BTX rev.0 10/100Mbps SMC EtherPower II 9432BTX rev.1 10/100Mbps SMC EtherPower II 9434TX_AH 10/100Mbps NOTE: The compatible bus type for this driver is PCI. PROBLEM: What driver is available for the SMC EtherPower II 9432TX/TXPWR /BTX/FTX 10/100Mbp Ethernet Controllers? NOTE: This driver package is to be installed on: SCO OpenServer 5.0.0: Release Supplement 5.0.0d (rs500d) Networking Supplement 1.0.0 (net100) SCO Advanced Hardware Supplement (AHS) 5.2 In this order. SCO OpenServer 5.0.2: SCO Advanced Hardware Supplement (AHS) 5.2 (available on 5.0.2 CD media) SCO OpenServer 5.0.4: rs504c - Release Supplement for SCO OpenServer Release 5.0.4 SCO OpenServer 5.0.5: rs505a - Release Supplement for SCO OpenServer Release 5.0.5 SCO Internet FastStart Release 1.0.0, 1.1.0 Supplements are downloadable from ftp.sco.com in the Supplements directory. You may install the 'Network' portion of SCO AHS 5.2 or just the Network Configuration Manager portion to obtain the minimal necessary networking software to configure this driver. SOLUTION: These drivers are available at the following URL: ftp://ftp.sco.com/pub/drivers Modifications: ************** 5.0.5a: created 5.0.5b: Add support for SMC 9432BTX/FTX/TX 5.0.5c: Add support for SMC 9434TX_AH and bug fixes. 5.0.5d: Correct multi-processor (MP) machine panic and packets sent out of order problem. 5.0.5e: Correct panic when streams too low. Bad packets larger then 1514 are dropped by driver. To install these drivers, take the following steps: - Log in as root. - Install SCO AHS Release 5.2 if not already installed. For SCO OpenServer 5.0.0 and 5.0.2 only. - Download the volume image(s) to your machine to a directory, for example, /tmp/vol. - Run 'custom' and select 'Install New'. Install from your host machine using 'Media Images'. - Give the directory name where the volume images have been downloaded, for example, /tmp/vol. - Complete the installation and exit custom. - Install the network adapter hardware into your computer. - Run 'netconfig' and configure the new adapter.