Drivers for the Digital EtherWORKS DE500 Ethernet Controllers. KEYWORDS: openserver v5 osr5 dcxf digital equipment dec ethernet controller adapter drivers bus pci 5.0.0 5.0.2 5.0.4 5.0.5 ahs advanced hardware 5.2 supplement ftp downloadable network de500 -xa -aa -ba -fa 10/100 fiber fast ethernet adapter RELEASE: SCO OpenServer Enterprise System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO OpenServer Desktop System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO OpenServer Host System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO Internet FastStart Release 1.0.0, 1.1.0 HARDWARE: Digital DE500 PCI 10/100 Fast Ethernet Adapter Digital DE500-XA PCI 10/100 Fast Ethernet Adapter Digital DE500-AA PCI 10/100 Fast Ethernet Adapter Digital DE500-BA PCI 10/100 Fast Ethernet Adapter Digital DE500-FA PCI 100 Fiber Fast Ethernet Adapter NOTE: The compatible bus type for this driver is PCI. PROBLEM: What driver is available for the Digital EtherWORKS DE500 Ethernet Controllers? NOTE: This driver package is to be installed on: SCO OpenServer 5.0.0: Release Supplement 5.0.0d (rs500d) Networking Supplement 1.0.0 (net100) SCO Advanced Hardware Supplement (AHS) 5.2 In this order. SCO OpenServer 5.0.2: SCO Advanced Hardware Supplement (AHS) 5.2 (available on 5.0.2 CD media) SCO OpenServer 5.0.4: No additional supplements are necessary SCO OpenServer 5.0.5: No additional supplements are necessary SCO Internet FastStart Release 1.0.0, 1.1.0 Supplements are downloadable from ftp.sco.com. You may install the 'Network' portion of SCO AHS 5.2 or just the Network Configuration Manager portion to obtain the minimal necessary networking software to configure this driver. SOLUTION: These drivers are available at the following URL: ftp://ftp.sco.com/pub/drivers To install these drivers, take the following steps: - Log in as root. - Install SCO AHS Release 5.2 if not already installed. For SCO OpenServer 5.0.0 and 5.0.2 only. - Download the volume image(s) to your machine to a directory, for example, /tmp/vol. - Run 'custom' and select 'Install New'. Install from your host machine using 'Media Images'. - Give the directory name where the volume images have been downloaded, for example, /tmp/vol. - Complete the installation and exit custom. - Install the network adapter hardware into your computer. - Run 'netconfig' and configure the new adapter.