Drivers for the Matrox G100, G200 and G400 series chipset based video adapters. KEYWORDS: openserver v5 osr5 matrox g100 g200 g250 g400 based chipset adapters drivers 5.0.4d bus pci agp 5.0.0 5.0.2 5.0.4 5.0.5 ahs advanced hardware 5.2 supplement ftp downloadable RELEASE: SCO OpenServer Enterprise System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO OpenServer Desktop System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO OpenServer Host System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 HARDWARE: Matrox G100 AGP Matrox G200 PCI or AGP Matrox G250 AGP Matrox G400 AGP NOTE: The compatible bus types for this driver are PCI and AGP. PROBLEM: What drivers are available for the Matrox G100, G200 and G400 series chipset based video adapters? NOTE: This driver package is to be installed on: SCO OpenServer 5.0.0: Release Supplement 5.0.0d (rs500d) Networking Supplement 1.0.0 (net100) SCO Advanced Hardware Supplement (AHS) 5.2 The vesa graphics driver in this order. SCO OpenServer 5.0.2: SCO Advanced Hardware Supplement (AHS) 5.2 (available on 5.0.2 CD media) SCO OpenServer 5.0.4: rs504c - Release Supplement for SCO OpenServer Release 5.0.4 SCO OpenServer 5.0.5: rs505a - Release Supplement for SCO OpenServer Release 5.0.5 Supplements are downloadable from ftp.sco.com in the Supplements directory. You may install the 'Graphics' portion of SCO AHS 5.2 or just the Video Configuration Manager portion to obtain the minimal necessary graphics software to configure this driver. SOLUTION: These drivers are available at the following URL: ftp://ftp.sco.com/pub/drivers Modifications: ************** 5.3.1a: created 5.3.1b: Add SNI Matrox G100/G200 support - modified refresh rates. Fix 32K color modes so exit restores text mode properly. 5.3.1c: Add Matrox G400 support. 5.3.1d: Update name slightly, verify G250 support, add support for 1600x1200 16M color modes. To install these drivers, take the following steps: - Log in as root. - Install SCO AHS Release 5.2 if not already installed. This applies to SCO OpenServer 5.0.0 and 5.0.2 only. - Install 'The vesa graphics driver' if not already installed. This applies to SCO OpenServer 5.0.0, 5.0.2 and 5.0.4. - Download the volume image(s) to your machine to a directory, for example, /tmp/vol. - Run 'custom' and select 'Install New'. Install from your host machine using 'Media Images'. - Give the directory name where the volume images have been downloaded, for example, /tmp/vol. - Install the hardware into your computer. - Run 'scoadmin video' and configure the new adapter. BUGS: - Older Matrox G100 video adapters may fail at 1280x1024 16m-color Vesa 75Hz (8MB). You will see the error message: MTXVidInit: Invalid ModeInfo To correct this problem, obtain the latest G100 video BIOS from Matrox and update your video adapter. Alternatively, you can use a different mode. Later revisions of this adapter do not have this problem.