Dear SCO Customer, Support Level Supplement (SLS) OSS671A, the setclk supplement for OpenServer 5.0.7, addresses a problem with the clock drifting when setting the time with asktime or setclk. SLS OSS671A contains this file: /etc/setclk Software Notes and Recommendations ---------------------------------- SLS OSS671A should only be installed on: SCO OpenServer Release 5.0.7 Installation Instructions ------------------------- 1. Download the OSS671A media image file from: ftp://ftp.sco.com/pub/openserver5/507/patches/oss671a Place the file in the /tmp directory, and rename the file by typing the command: mv /tmp/oss671a /tmp/VOL.000.000 2. Run the Software Manager with the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 3. Pull down the "Software" menu and select "Install New". 4. When prompted for the host from which to install, choose the local machine and then "Continue". In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue". 6. When prompted for the "Image Directory", enter "/tmp" (or the directory where you placed the VOL file in step 1) and choose "OK". 7. When prompted to select software to install, make sure that the "OSS671A" entry is highlighted. Choose "Install". 8. Installation of SLS OSS671A is now complete. To exit the Software Manager, select "Exit" from the "Host" menu. 9. A kernel relink occurred during this process and it will be necessary to reboot the server for the supplement to take effect. Removal Instructions -------------------- Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis. To remove SLS OSS671A from SCO OpenServer 5.0.7, follow these steps: 1. Log in as root. 2. Execute the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 3. Highlight "OSS671A: /etc/setclk supplement for OpenServer 5.0.7. 4. Pull down the "Software" menu and select "Remove Software". 5. Once the removal finishes, quit the Software Manager. Removal of SLS OSS671A is now complete. 6. A kernel relink occurred during this process and it will be necessary in order to reboot the server. If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.