Dear SCO Customer, Support Level Supplement (SLS) OSS670A, the SCO OpenServer Release 5.0.7 Boot Floppy Image Supplement, addresses the following problem: The boot floppy included in the OpenServer Release 5.0.7 media kit does not boot on some servers and desktops. Typically, the boot floppy from the OpenServer Release 5.0.7 media kit is inserted in the target system floppy drive and the floppy drive access light goes on for a short period of time at boot, yet the system acts as though there is no boot floppy available. The error message "Boot Error" may also be displayed. SLS OSS670A provides a boot floppy image which contains the correct "signature bytes" so that it will be recognized by the BIOS on server and desktop systems that do not recognize the boot floppy image from the OpenServer Release 5.0.7 media kit. Software Notes and Recommendations ---------------------------------- SLS OSS670A can be used with: SCO OpenServer Release 5.0.7 Installation Instructions ------------------------- 1. Download the OSS670A boot floppy image file from: ftp://ftp.sco.com/pub/openserver5/507/patches/oss670a/oss670a.dd Place the file in the /tmp directory, and extract it to a formatted floppy with this command: dd if=/tmp/oss670a.dd of=/dev/rfd0 bs=36b 2. The floppy generated above should now be labeled as a SCO OpenServer Release 5.0.7 boot floppy, and may be used as boot media.