What is oss669A, the OpenServer 5.0.7 Socket Driver Supplement? KEYWORDS: sls oss oss669 oss699a 507 5.0.7 openserver osr5 patch supplement smp oms office mail server smp 4.1.0Ga 410 4.1.0 slow mailq transport unavailable ERGREF 712765 erg712795 ENGREF fz530902 530902 soreceive unexpected M_DATA 131 RELEASE: SCO Office Server 4.1 SCO Openserver System Release 5.0.7 PROBLEM: The SCO Office Mail Server 4.1.0Ga is delivering mail very slowly. When I use the mailq command to inspect the delivery queue I see messages with the notation "transport unavailable". I also see similar "transport unavailable" messages in the /var/adm/syslog file. The below messages are seen in /usr/adm/messages: WARNING: soreceive: unexpected message type x00000083 WARNING: soreceive: not M_DATA, found 131 SOLUTION: Download and install SCO Support Level Supplement (SLS) OSS669A from: ftp://ftp.sco.com/pub/openserver5/507/patches/oss669a ---------------------------------------------------------- Dear Customer, The Support Level Supplement (SLS) OSS669A, the SCO OpenServer 5.0.7 Socket Driver Supplement, provides an updated Driver.o which overcomes the following: Socket connections in non-blocking mode are returning prematurely. This causes Postfix to think that the Cyrus transport agent, lmtpd, is unavailable. This only occurs on SMP systems. The transport unavailable message can also result when Postfix or Cyrus are misconfigured. This supplement can be installed on the following SCO OpenServer releases: SCO OpenServer Release 5.0.7 with Maintenance Pack 3 ---------------------------------------------------------- I. Software Notes and Recommendations 1. If you have any questions concerning this supplement, please contact your SCO software supplier or your SCO Support Representative. ---------------------------------------------------------- II. Installation Instructions To install OSS669A follow these steps: 1. Download the OSS669A media image files from: ftp://ftp.sco.com/pub/openserver5/507/patches/oss669a 2. Place the files in the /tmp directory. 3. Run the Software Manager with the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 4. Pull down the "Software" menu and select "Install New". 5. When prompted for the host from which to install, choose the local machine and then "Continue". 6. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue". 7. When prompted for the "Image Directory", enter "/tmp" (or the directory where you placed the VOL files in step 2) and choose "OK". 8. When prompted to select software to install, make sure that the "OSS669A" entry is highlighted. Choose "Install". 9. Installation of SLS OSS669A is now complete. To exit the Software Manager, select "Exit" from the "Host" menu. ---------------------------------------------------------- III. Removal Instructions Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis. 1. Log in as root. 2. Execute the command: # scoadmin software or double-click on the Software Manager icon in the desktop. 3. Highlight the "OSS669A - " entry. 4. Pull down the "Software" menu and select "Remove Software". 5. Once the removal finishes, quit the Software Manager. Removal of SLS OSS669A is now complete. SEE ALSO: TA # 125991, "The SCO Office Mail Server 4.1.0Ga is delivering mail very slowly." TA # 125539, "The server may hang with "soreceive" errors seen in syslog and on the console."