What is the UDK Compatibility Module Update version 8.0.2Ca for OpenServer 5.0.7? KEYWORDS: udkcompat udk compatibility dst runtime java mouse wheel scrolling fz534221 progress RELEASE: SCO OpenServer Release 5.0.7 PROBLEM: What problems are fixed by the UDK Compatibility Module Update UDKcompat_8.0.2Ca? SOLUTION: The UDK Compatibility Module Update contains the following fixes: 1. Update timezone rules for UDK applications in order to comply with changes to U.S. Daylight Savings Time going into effect in 2007. fz532758 fz534222 fz534221 2. The UDK Motif runtime updated to allow J2SE 1.4.2 to scroll list widgets with mouse wheel events. fz533978 This supplement can be installed on the following SCO OpenServer releases: SCO OpenServer Release 5.0.7 with Maintenance Pack 5 ---------------------------------------------------------- I. Software Notes and Recommendations 1. If you have any questions concerning this supplement, please contact your SCO software supplier or your SCO Support Representative. ---------------------------------------------------------- II. Installation Instructions To install UDKcompat Update 8.0.2Ca follow these steps: 1. Login as root 2. Create an empty directory, such as /tmp/UDKcompat, to which the patch will be downloaded. 3. Download the UDKcompat_802Ca.VOLS.tar file from ftp://ftp.sco.com/pub/openserver5/507/other/UDKcompat_8.0.2Ca to the directory created in step 2. 4. Extract the contents of the downloaded tar file tar -xf ./UDKcompat_802Ca.VOLS.tar 5. If you have installed the UnixWare/OpenServer Development System, depending on the method used to install the Enhanced Debugger (uedebug), the UDKcompat component or one or more of its subcomponents may be locked on the system. To avoid any potential problems preventing the successful installation of the update, follow these steps exactly. a. Check for the presence of the Enhanced Debugger installed as a UnixWare package. pkginfo | grep uedebug b. If the enhanced Debugger was installed, remove the debugger before attempting to install the updated UDK Compatibility Module. An updated debugger will be installed as part of the UDK Compatibility Module update. pkgrm uedebug Confirm removal of the package. 6. Run the Software Manager with the command: scoadmin software or double-click on the Software Manager icon in the desktop. 7. Pull down the "Software" menu and select "Install New". 8. When prompted for the host from which to install, choose the local machine and then "Continue". 9. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue". 10. When prompted for the "Image Directory", enter "/tmp/UDKcompat" (or the directory where you untar'ed the UDKcompat_802Ca.VOLS.tar file in step 3) and choose "OK." 11. When prompted to select software to install, make sure that the "UDKcompat" entry is highlighted. Choose "Install". 12. Installation of the UDK Compatibility Module Update is now complete. To exit the Software Manager, select "Exit" from the "Host" menu. 13. Once the installation has completed, you can remove or archive the downloaded patch, the media image files, and the containing directory created in step 2. 14. There is no need to reboot the system after installing this package. However, if your system has any UDK applications or daemons currently active, then these programs will continue to run with the old versions of the UDK libraries until they are restarted. One way to restart them is by rebooting the system. Note that when all package updates and patches have been installed, it is good practice to reboot the system at the earliest opportunity. This will ensure that no programs continue to run with old libraries, commands, or other files. ---------------------------------------------------------- III. Removal Instructions Note: The UDK Compatibility Module Update is intended to be a permanent update. If you choose to remove this update, UDK (UnixWare) applications will cease to run until you reinstall an earlier UDK Compatibility Module (UDKcompat) from your Installation media or subsequent Maintenance Packs. 1. Log in as root. 2. Execute the command: scoadmin software or double-click on the Software Manager icon in the desktop. 3. Highlight the entry labelled "UDK Compatibility Libraries (ver 8.0.2Ca)." 4. Pull down the "Software" menu and select "Remove Software". 5. Once the removal finishes, quit the software manager. 6. Install another version of UDKcompat as per the note above to ensure that UDK applications continue to run. 7. There is no need to reboot the system after removing this package; however, if you have also installed another version of the UDKcompat, read step 14 of the installation instructions above regarding restarting UDK applications and/or rebooting your system.