Drivers for the Broadcom NetXtreme BCM5700 series Gigabit Ethernet family of network cards - bcme Driver version 8.3.2 KEYWORDS: openserver v5 osr5 bcme broadcom netxtreme ethernet adapter drivers bus pci 5.0.7 ftp downloadable network fz533803 RELEASE: SCO OpenServer Enterprise System Release 5.0.7 SCO OpenServer Desktop System Release 5.0.7 PROBLEM: What driver is available for the Broadcom NetXtreme and HARDWARE listed below? HARDWARE: All of the following cards are supported: 3Com 3C996/3C1000/3C94X Gigabit Ethernet Broadcom BCM5700 NetXtreme Gigabit Ethernet Broadcom BCM5701 NetXtreme Gigabit Ethernet Broadcom BCM5702 NetXtreme Gigabit Ethernet Broadcom BCM5703 NetXtreme Gigabit Ethernet Broadcom BCM5704 NetXtreme Gigabit Ethernet Broadcom BCM5704S NetXtreme Gigabit Ethernet Broadcom BCM5705 NetXtreme Gigabit Ethernet Broadcom BCM5714 NetXtreme Gigabit Ethernet Broadcom BCM5715 NetXtreme Gigabit Ethernet Broadcom BCM5720 NetXtreme Gigabit Ethernet Broadcom BCM5721 NetXtreme Gigabit Ethernet Broadcom BCM5752 NetXtreme Gigabit Ethernet Broadcom BCM5753 NetXtreme Gigabit Ethernet Broadcom BCM5780 NetXtreme Gigabit Ethernet Broadcom BCM5781 NetXtreme Gigabit Ethernet Broadcom BCM5782 NetXtreme Gigabit Ethernet for hp Broadcom BCM5789 NetXtreme Gigabit Ethernet Broadcom NetXtreme Gigabit Ethernet for hp HP ProLiant NC 150T PCI 4-port Gigabit Combo Switch Adapter HP ProLiant NC 320T PCI Express Gigabit Server Adapter HP NC1020 ProLiant Gigabit Server Adapter 32 PCI HP NC320i Integrated Gigabit Server Adapter HP NC324i Integrated Dual Port PCI Express Gigabit Server Adapter HP NC325i Integrated Dual Port PCI Express Gigabit Server Adapter HP NC326i Integrated Dual Port PCI Express Gigabit Server Adapter HP NC6770 Gigabit Server Adapter HP NC7760 Gigabit Ethernet HP NC7761 Gigabit Ethernet HP NC7770 Gigabit Ethernet HP NC7771 Gigabit Ethernet HP NC7772 Gigabit Ethernet HP NC7780 Gigabit Ethernet HP NC7781 Gigabit Ethernet HP NC7782 Gigabit Ethernet HP NC7783 Gigabit Ethernet SOLUTION: The 'bcme' driver is available at the following URL: ftp://ftp.sco.com/pub/openserver5/507/drivers MODIFICATION HISTORY ******************** v8.3.2 (October 19, 2005) ============================= Fixes: ------------- After version 8.2.11 through 8.3.2: 1) Problem : Incorrect branding on HP devices. 2) Problem : Link down messages are not displayed immediately after adapter reset. 3) Problem : The PHY registers can become corrupted on all 5714S, 5715S, and 5780S devices. 4) Problem : Health monitoring software does not register link restoration events. 5) Problem : ASF "Alive" heartbeat constant has changed. 6) Problem : Poor performance on 5714 family devices. For version 8.2.11 and prior: 7) Problem : Driver fails SCO certification tests. 8) Problem : Tx statistic counters incorrect. 9) Problem : 5700 fails to initialize. 10) Problem : 5704S fails flow control test. 11) Problem : 5701 fails to receive traffic when configured to 10Mbps, half-duplex, link forced. 12) Problem : Serdes 325i devices not recognized correctly. 13) Problem : Flow control fails to work in "auto" mode. 14) Problem : 5714 devices do not fall back to forced link if PCS_SYNCED is detected. 15) Problem : 5715 devices are not recognized on boot. 16) Problem : Driver fails certification test. 17) Problem : 5714 devices do not fall back to forced link if PCS_SYNCED is detected. 18) Problem : 5714 devices do not fall back to forced link if PCS_SYNCED is detected. 19) Problem : Firmware version string missing product name on 5714 devices. 20) Problem : 5703B1S never gets link. 21) Problem : 5704S devices showing link up when link is still being negotiated. 22) Problem : Flow control automation test fails. 23) Problem : PCIE devices lock-up. 24) Problem : Link negotiation fails when 5751 LOM is connected back-to-back with another device. 25) Problem : Driver incorrectly limits the number of receive rules available for the 5714 family of devices. 26) Problem : ATI transmit timeout - "NETDEV WATCHDOG". 27) Problem : Jumbo frame support on some systems caused device counters to increment CRC errors. 28) Problem : 5714 device support needs to be removed for the 8.1b driver release. 29) Problem : Driver missing new HT-LE device IDs. 30) Problem : Firmware version not displayed for EEPROM devices. 31) Problem : Driver crashes. 32) Problem : Capacitive coupling and preserve preemphasis settings may be set incorrectly. 33) Problem : Driver shows a device identification string of 5721(B0) instead of NC320T. 34) Problem : Device fails to get link when connection is forced to 10Mbps. 35) Problem : PLL clock unstable. 36) Problem : 5704 LOM interfaces will not ping. 37) Problem : Force the NC150T to autonegotiate its linkspeed and duplex settings. 38) Problem : Driver will not load on a BCM5700B2 39) Problem : Firmware version number not displayed on 5750 family of devices. 40) Problem : Preemphasis settings, set by the firmware, need to be preserved. 41) Problem : 5751B1 not recognized by driver. 42) Problem : NC1020 banner string inconsistant with others. 43) Problem : NC1020 showing as NC7722 in banner. 44) Problem : TPM module cannot be tested. 45) Problem : Bit error rate too high in certain situations. 46) Problem : The data LED of the NIC flashes too quickly when the NIC is configured for Shared Traffic LED mode. 47) Problem : BCM5700 and BCM5701 NICs have high number of errors with long cables. 48) Problem : ANT test fails with delmca error. 49) Problem : LEDs illuminated incorrectly. 50) Problem : llistat -l reports wrong link speed. 51) Problem : 5750 A1 devices hang on initialization. 52) Problem : LEDs illuminate incorrectly. 53) Problem : 5750 family link LED does not illuminate to the correct color in wireless combo mode. 54) Problem : 5750 family link LED does not illuminate to the correct color in wireless combo mode. 55) Problem : 5750A1 family of chips displaying as "Broadcom Compatible" 56) Problem : 5721 is displayed as 575X device. 57) Problem : Driver crashes on unload. 58) Problem : GetAdapterInfo locks up system. 59) Problem : Normal TCP and UDP traffic not seen when adapter is put into promiscuous mode. 60) Problem : Netperf shows wildly incorrect transmit statistics. 61) Problem : System hangs when loading the driver on a PCIE system. 62) Problem : 575X devices fail after GRC reset. 63) Problem : Some register writes fail on 575X cards. 64) Problem : Some register writes fail on SMP systems. 65) Problem : No link interrupts are delivered. 66) Problem : Asf fails after GRC reset. 67) Problem : Driver locks up on load. 68) Problem : NC7761 controller listed twice. 69) Problem : NC7761 controller listed as "unknown" in syslog messages. 70) Problem : Unable to identify 5704 B0 card. 71) Problem : Implementation of 1.2V change incorrect. 72) Problem : Slot number reported as "0" no matter which physical port is being used. 73) Problem : Driver sometimes gets a MAC address of all zeroes. 74) Problem : Performance enhancement : ADC and gamma fix. 75) Problem : Serdes drive level change for 5704S and 5704CIOBES. 76) Problem : On 5704 AX chips, a DMA transfer that uses the last byte on the 4G boundary will trigger a "Host address overflow" error. 77) Problem : (CQ8231) 5704 B0 devices show up in netconfig as "Broadcom compatible". 78) Problem : (CQ8049) Advanced option menu shows "-" in line speed option menu for fiber cards. 79) Problem : Unsupported line speeds are listed as options in netconfig for fiber devices. 80) Problem : Multiple NICs are detected when subvendor and subsystem IDs conflict with the NIC devices. 81) Problem : Link down messages are displayed at NOTICE level. 82) Problem : Driver does not have OEM IDs for 5703 B0 devices 83) Problem : In some extremely rare situations, 5703, 5704, and 5705 Copper NICs may not link up after a PHY reset. 84) Problem : Fixed 5704S link up problem when it is set to autoneg and link partner has autoneg disabled. 85) Problem : Added workaround for 5704S autoneg. 86) Problem : Fixed problem detecting 5782. 87) Problem : Fixed 5704S linking problem. 88) Problem : Fixed problem that prevented multiple NICs from loading. 89) Problem : Fixed 5701 fiber hang problem when booting without cable. 90) Problem : Fixed flow control problems when autoneg. is disabled. 91) Problem : Fixed parity errors on 5703 in PCIX systems. 92) Problem : Fixed the cable disconnection problem. 93) Problem : Fixed problems with 5702/5703. 94) Problem : Fixed the problem of over reporting CRC errors. 95) Problem : Fixed 1000 half duplex late collision problem. 96) Problem : Fixed the problem of missing the first packet with fiber cards. 97) Problem : Fixed a hang problem on A3 Fiber cards. 98) Problem : Fixed a hang problem on BCM5700 NIC when set to 10Mbps. 99) Problem : Fixed a hang problem when booting up with no fibre cable connected. 100) Problem : Fixed fibre connection problems at boot up time. 101) Problem : Fixed the problem of multiple NICs sharing the interrupt. 102) Problem : Fixed some fibre autonegotiation problems. 103) Problem : Fixed panic problem when doing flooding ping. 104) Problem : Fixed symbol errors and other errors reported by ANT test. 105) Problem : Fixed a symbol error reported by ANT test suite. 106) Problem : Fixed problems found by the ANT test suite. Enhancements: ------------- After version 8.2.11 through 8.3.2: 1) Change : Removed 5903 support. 2) Change : Added ECD13216 fix for SERDES crosstalk problem. 3) Change : Removed 5714S and 5715S support. 4) Change : Add 5903F and 5903M support to the driver. For version 8.2.11 and prior: 5) Change : Remove 5714 and 5715 support from the driver. 6) Change : Added support for new HP NC32Xi products. 7) Change : Added 5715X support into driver. 8) Change : Added 5714X / 5780X support into driver. 9) Change : Added support for jumbo frames for 5714X and HT2000 devices. 10) Change : Added support for 5714X and HT2000 devices. 11) Change : Added support for 5752 devices. 12) Change : Updated copyright strings. 13) Change : Added support for more NVRAM types. 14) Change : Added support for 5753 series devices. 15) Change : Backend (LM) code is now shared with UnixWare and OpenServer. 16) Change : Separated OpenServer and UnixWare frontends. 17) Change : Added firmware version to banner string. 18) Change : Add capacitive coupling support. 19) Change : Add support for 5751A3/B0, 5751F and 5789. 20) Change : Add support for 5751M. 21) Change : Remove 5751M support from driver. 22) Change : Moved multicast address tracking within the driver. Added a flag in Space.c to enable support for more multicast addresses. 23) Change : Add product banner message. 24) Change : Added code to allow the firmware to do the autonegotiation, if it is capable of doing so. 25) Change : Set a register flag to facilitate PCIE debugging, should a problem occur. 26) Change : Added code for 5750A1 family of devices. 27) Change : Added new 5750 family LED modes. 28) Change : Added missing 5705 A3 initialization strings. 29) Change : Added slot and port numbers to link messages. 30) Change : Added a function which calls a kernel facility, if present, to report link failure. 31) Change : Added code to support 5704 B0. 32) Change : Added branding for one major OEM. 33) Change : Added a new OEM ID in AOF file. 34) Change : Added new OEM IDs and new device IDs for 5705 A2/A3. 35) Change : Added MAC address override in space.c. 36) Change : Added new OEM IDs in AOF file. 37) Change : Added OEM IDs. 38) Change : Improved flow control. 39) Change : Added latest OEM IDs. 40) Change : Enabled Flow Control Advertisement by default. 41) Change : Updated driver for 5705 A1. 42) Change : Added support for 5704S hardware autoneg. 43) Change : Added support for 5705. 44) Change : Added function number to allow adding the second 5704 interface. 45) Change : Added 5704 support. 46) Change : Added new OEM IDs. 47) Change : Added necessary delays after changing GPIOs. 48) Change : Added new OEM subsystem IDs. 49) Change : Added new device IDs. 50) Change : Made changes to Fiber autoneg. 51) Change : Implemented new scheme for LED modes. 52) Change : Added new PCI IDs for 5702/5703. 53) Change : Added Ethernet@Wirespeed. 54) Change : Added 5702 support. 55) Change : Added latest device IDs. 56) Change : Added support for new boards. 57) Change : Added more OEM hardware support. 58) Change : Added BCM5701 support. 59) Change : Added logic to free buffers on the write queue when it reaches high water mark. 60) Change : Added workaround for AMD Athlon systems. 61) Change : Added fibre support. 62) Change : Added jumbo frames. ------------------------------------------------------------------------- I. Installation To install these drivers, take the following steps: - Log in as root. - Download the volume image to your machine to a directory, for example, /tmp/vol. - Run 'custom' and select 'Install New'. Install from your host machine using 'Media Images'. - Give the directory name where the volume images have been downloaded, for example, /tmp/vol. - Complete the installation and exit custom. - Install the network adapter hardware into your computer. - Run 'netconfig' and configure the new adapter. ------------------------------------------------------------------------ II. Software Notes The compatible bus type for this driver is PCI. This driver has been tested with and is supported on: SCO OpenServer Release 5.0.7: osr507mp4 - Maintainance Pack 4 for SCO OpenServer Release 5.0.7 1000 Mbps (1 Gbps) full duplex fixed speed is only valid for fibre connections. For copper twisted pair connections, 1 Gbps can only be set through auto negotiation with a 1 Gbps link partner. Auto negotiation of flow control is only valid when the line speed is set to auto negotiation (all speeds advertised or single speed advertised). Jumbo Frames and Other Advanced Parameters ========================================== Jumbo MTU sizes and other advanced tunable parameters for the BCM5700 controller are located in the file space.c in the directory /etc/conf/pack.d/bcme. A description for each parameter is contained in space.c. Modify the desired parameter in space.c, rebuild the kernel, and reboot the system. Note that the MTU sizes can be individually set for each adapter in the system whereas all other paramters apply globally to all adapters. Disabling ASF in the firmware ============================== This driver does not support ASF. If you find that the driver does not load due to ASF being enabled in the firmware, use the following procedure to disable it: 1. Download the BCM57xx User diagnostic from the Broadcom driver download site at : http://www.broadcom.com/drivers/downloaddrivers.php 2. Create a DOS bootable floppy 3. Unpack the diag zip-file into this floppy 4. Boot to DOS using this floppy 5. Enter "b57udiag -cmd" 6. Enter setasf -d 7. Reboot the system