Drivers for the Adaptec Ultra SCSI 29160/39160 Host Bus Adapters KEYWORDS: openserver v5 osr5 adaptec adapter drivers bus pci 5.0.6 ahs advanced hardware 5.2 supplement ftp downloadable RELEASE: SCO OpenServer Enterprise System Release 5.0.5, 5.0.6 SCO OpenServer Desktop System Release 5.0.5, 5.0.6 SCO OpenServer Host System Release 5.0.5, 5.0.6 HARDWARE: Adaptec 29160N PCI Controller (7892 Chipset) Adaptec 39160 PCI Controller (7899 Chipset) Embedded AIC-7892 Controller Embedded AIC-7899 Controller NOTE: The compatible bus type for this driver is PCI. PROBLEM: What drivers are available for the Adaptec Ultra SCSI Host Adapters? NOTE: This driver package is to be installed on: SCO OpenServer 5.0.5 5.0.6 SOLUTION: These drivers are available at the following URL: ftp://ftp.sco.com/pub/drivers Modification History ******************** 5.0.6 - Base release, 5/3/2000 To install these drivers, take the following steps: - Log in as root. - Download the btld image(s) to your machine to a directory/file, for example, /tmp/ad160.btld. - Verify the downloaded image using sum, sum -r /tmp/ad160.btld 56118 2880 /tmp/ad160.btld - Format a floppy media using the format command. - Copy the downloaded image to the floppy, dd if=/tmp/ad160.btld of=/dev/rinstall bs=8k - Verify the copied floppy image using sum, sum -r /dev/rinstall 01188 2880 /dev/rinstall - Mount the floppy image mount -f AFS /dev/fd0 /mnt - Use the BTLD Install script to install the driver. /etc/btldinstall /mnt Once the kernel has been relinked, shutdown the host and install the Adaptec controller. Reboot the host and verify that the driver is initializing the card. The boottime banner should look much like, adapter 0xec00-0xecff 11 - type=ad160 ha=0 bus=0 id=7 fts=sto When the adapter is installed and the boottime banner is properly displayed, you may use the appropriate mkdev script to add a disk, tape, or cdrom to the Ultra SCSI Bus.