Drivers for the IBM Token-Ring PCI Family Adapter KEYWORDS: openserver v5 osr5 trps ibm token ring controller adapter drivers bus pci 5.0.0 5.0.2 5.0.4 5.0.5 5.0.6 ahs advanced hardware 5.2 supplement ftp downloadable network ibm pci adapter wake on lan high speed 100/16/4 management RELEASE: SCO OpenServer Enterprise System Release 5.0.0 - 5.0.6 SCO OpenServer Desktop System Release 5.0.0 - 5.0.6 SCO OpenServer Host System Release 5.0.0 - 5.0.6 SCO Internet FastStart Release 1.0.0, 1.1.0 HARDWARE: IBM PCI Token-Ring Adapter IBM PCI Token-Ring Wake on LAN IBM 16/4 Token-Ring PCI Adapter 2 IBM 16/4 Token-Ring PCI Special IBM 16/4 Token-Ring PCI Management Adapter IBM High-Speed 100/16/4 Token-Ring PCI Adapter NOTE: The compatible bus type for this driver is PCI PROBLEM: What driver is available for the IBM Token-Ring PCI Family Adapter? NOTE: This driver package is to be installed on: SCO OpenServer 5.0.0: Release Supplement 5.0.0d (rs500d) Networking Supplement 1.0.0 (net100) SCO Advanced Hardware Supplement (AHS) 5.2 In this order. SCO OpenServer 5.0.2: SCO Advanced Hardware Supplement (AHS) 5.2 (available on 5.0.2 CD media) SCO OpenServer 5.0.4: rs504c - Release Supplement for SCO OpenServer Release 5.0.4 SCO OpenServer 5.0.5: rs505a - Release Supplement for SCO OpenServer Release 5.0.5 SCO OpenServer 5.0.6: No supplements are required. SCO Internet FastStart Release 1.0.0, 1.1.0 Supplements are downloadable from ftp.sco.com in the Supplements directory. You may install the 'Network' portion of SCO AHS 5.2 or just the Network Configuration Manager portion to obtain the minimal necessary networking software to configure this driver. SOLUTION: These drivers are available at the following URL: ftp://ftp.sco.com/pub/drivers Modifications: ************** 5.0.5a: created 5.0.5b: New adapter support 5.0.5c: Increase IRQ's to 256 and better card initialization. Verify IBM High-Speed 100/16/4 works at 100Mbits (with back to back cabling). IBM tested with switch. Verify newer IBM 16/4 Token Ring PCI Management Adapter and IBM PCI Wake on LAN Token Ring Adapters work. 5.0.6 : Performance Improvements To install these drivers, take the following steps: - Log in as root. - Install SCO AHS Release 5.2 if not already installed. For SCO OpenServer 5.0.0 and 5.0.2 only. - Download the volume image(s) to your machine to a directory, for example, /tmp/vol. - Run 'custom' and select 'Install New'. Install from your host machine using 'Media Images'. - Give the directory name where the volume images have been downloaded, for example, /tmp/vol. - Complete the installation and exit custom. - Install the network adapter hardware into your computer. - Run 'netconfig' and configure the new adapter.