Drivers for the IBM Auto LANStreamer PCI Adapter KEYWORDS: openserver v5 osr5 wwdu ibm etherstreamer lanstreamer token ring controller adapter drivers bus pci 5.0.0 5.0.2 5.0.4 5.0.5 ahs advanced hardware 5.2 supplement ftp downloadable network ibm auto lanstreamer pci adapter RELEASE: SCO OpenServer Enterprise System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO OpenServer Desktop System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO OpenServer Host System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO Internet FastStart Release 1.0.0, 1.1.0 HARDWARE: IBM Auto LANStreamer PCI Adapter IBM EtherStreamer MC 32 Adapter IBM LANStreamer MC 32 Adapter IBM Auto LANStreamer MC 32 Adapter IBM LANStreamer MC 16 Adapter NOTE: The compatible bus type for this driver is PCI and MC. PROBLEM: What driver is available for the IBM Auto LANStreamer PCI-MC Adapter Token Ring Controllers? NOTE: This driver package is to be installed on: SCO OpenServer 5.0.0: Release Supplement 5.0.0d (rs500d) Networking Supplement 1.0.0 (net100) SCO Advanced Hardware Supplement (AHS) 5.2 In this order. SCO OpenServer 5.0.2: SCO Advanced Hardware Supplement (AHS) 5.2 (available on 5.0.2 CD media) SCO OpenServer 5.0.4: No additional supplements are necessary SCO OpenServer 5.0.5: No additional supplements are necessary SCO Internet FastStart Release 1.0.0, 1.1.0 Supplements are downloadable from ftp.sco.com. You may install the 'Network' portion of SCO AHS 5.2 or just the Network Configuration Manager portion to obtain the minimal necessary networking software to configure this driver. SOLUTION: These drivers are available at the following URL: ftp://ftp.sco.com/pub/drivers To install these drivers, take the following steps: - Log in as root. - Install SCO AHS Release 5.2 if not already installed. For SCO OpenServer 5.0.0 and 5.0.2 only. - Download the volume image(s) to your machine to a directory, for example, /tmp/vol. - Run 'custom' and select 'Install New'. Install from your host machine using 'Media Images'. - Give the directory name where the volume images have been downloaded, for example, /tmp/vol. - Complete the installation and exit custom. - Install the network adapter hardware into your computer. - Run 'netconfig' and configure the new adapter.