Drivers for the Intel EtherExpress PRO/100B and PRO/100+ ... KEYWORDS: openserver v5 osr5 eeE intel etherexpress ethernet adapter drivers bus pci 5.0.0 5.0.2 5.0.4 5.0.5 ahs advanced hardware 5.2 supplement ftp downloadable network intel part number PILA8465b PILA8475B PILA8465W PILA8460 PILA8900G1 PILA8900G2 PILA8500 PILA8520 pro/100b pro100b pro/100+ pro100+ pro/100b t4 etherexpress pro/100 wfm management pro/10+ pro10+ RELEASE: SCO OpenServer Enterprise System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO OpenServer Desktop System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO OpenServer Host System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO Internet FastStart Release 1.0.0, 1.1.0 HARDWARE: Intel PRO/100 PILA8465 Intel PRO/100B PILA8465B Intel PRO/100+ PILA8460 Intel PRO/100+ Server Adapter PILA8470 Intel PRO/100+ Server Adapter PILA8470B Intel PRO/100+ Dual Port Server Adapter PILA8472 Intel PRO/100+ Dual Port Server Adapter PILA8472B Intel PRO/100 S Dual Port Server Adapter PILA8472C1 Intel PRO/100 Server Adapter PILA8474 Intel PRO/100 S Server Adapter PILA8474C1 Intel PRO/100 S Server Adapter PILA8474C3 Intel EtherExpress PRO/100 WfM PILA8465W Intel EtherExpress PRO/100+ Management PILA8900G1 Intel EtherExpress PRO/100+ Management PILA8900G2 Intel PRO/100B T4 PILA8475B Intel Pro/10+ PCI PILA8500 Intel Pro/10+ PCI PILA8520 Intel(R) PRO/100B PCI Adapter (TX) Intel(R) 82557-based Integrated Ethernet PCI (10/100) Intel(R) 82557-based Integrated Ethernet with Wake on LAN Intel(R) 82558-based Integrated Ethernet Intel(R) 82558-based Integrated Ethernet with Wake on LAN Intel(R) 82559-based Fast Ethernet Lan on Motherboard Intel(R) 82559-based Fast Ethernet Lan Motherboard with Wake on Lan Intel(R) PRO/100+ PCI Adapter Intel(R) PRO/100+ Management Adapter Intel(R) PRO/100+ Alert on LAN II Adapter Intel(R) PRO/100+ Management NIC with AoL Intel(R) PRO/100+ Server Adapter NOTE: The compatible bus type for this driver is PCI. PROBLEM: What drivers are available for the Intel EtherExpress PRO/100B, PRO/100+, and HARDWARE listed above? NOTE: This driver package is to be installed on: SCO OpenServer 5.0.0: Release Supplement 5.0.0d (rs500d) Networking Supplement 1.0.0 (net100) SCO Advanced Hardware Supplement (AHS) 5.2 In this order. SCO OpenServer 5.0.2: SCO Advanced Hardware Supplement (AHS) 5.2 (available on 5.0.2 CD media) SCO OpenServer 5.0.4: rs504c - Release Supplement for SCO OpenServer Release 5.0.4 SCO OpenServer 5.0.5: rs505a - Release Supplement for SCO OpenServer Release 5.0.5 SCO Internet FastStart Release 1.0.0, 1.1.0 Supplements are downloadable from ftp.sco.com. You may install the 'Network' portion of SCO AHS 5.2 or just the Network Configuration Manager portion to obtain the minimal necessary networking software to configure this driver. SOLUTION: These drivers are available at the following URL: ftp://ftp.sco.com/pub/drivers Modification History ******************** 5.0.5a - Base release. 5.0.5b - 1.4.1 New card support. Misc performance fixes. 5.0.5c - 1.4.3 New card support. Fix lost link when cable removed eeE[0] - Lost Link error. Fix SCB_CUC_MASK to 4 bits. Set PCI_IO_RANGE to 31. 5.0.5d - 1.4.7 Fix PANIC: phystokv - page not mapped, and Driver goes belly up if watchdog timer called. 5.0.5e - 1.4.9 Fix compare-errors during ftp load-tests. 5.0.5f - 1.4.10 Fix problems including supporting additional boards. To install these drivers, take the following steps: - Log in as root. - Install SCO AHS Release 5.2 if not already installed. For SCO OpenServer 5.0.0 and 5.0.2 only. - Download the volume image(s) to your machine to a directory, for example, /tmp/vol. - Run 'custom' and select 'Install New'. Install from your host machine using 'Media Images'. - Give the directory name where the volume images have been downloaded, for example, /tmp/vol. - Complete the installation and exit custom. - Install the network adapter hardware into your computer. - Run 'netconfig' and configure the new adapter. WARNING: If you get the error message: "The custom+ binary (backend) process has died." The death of custom+ leaves a partially installed Intel PRO/100B/PRO/100+ driver. Remove this driver from the system. Next, you must remove the original Intel PRO100/B driver from the system before you will be able to install the new one. Double click (expand) "SCO OpenServer Enterprise System", next expand "SCO OpenServer Enterprise System Connectivity", next expand "SCO OpenServer Enterprise System Network Drivers". Now select "Intel EtherExpress PRO/100B LAN Adapter" and remove it by selecting "Remove Software..." from the Software menu. A screen will appear prompting to Rollback patches. Select to do this. Now install the new driver according to the instructions above. Replace the word "Enterprise" above with "Desktop" for desktop systems.