Drivers for the DEC FDDIcontroller/PCI/EISA KEYWORDS: openserver v5 osr5 dfx digital equipment dec ethernet fddi controller adapter drivers bus pci eisa 5.0.4 5.0.5 supplement ftp downloadable network fdd icontroller/pci (defpa) eisa (defea) RELEASE: SCO OpenServer Enterprise System Release 5.0.4, 5.0.5 SCO OpenServer Desktop System Release 5.0.4, 5.0.5 SCO OpenServer Host System Release 5.0.4, 5.0.5 HARDWARE: DEC FDDIcontroller/PCI (DEFPA) DEC FDDIcontroller/EISA (DEFEA) NOTE: The compatible bus type for this driver is PCI and EISA. PROBLEM: What driver is available for the DEC FDDIcontroller/PCI/EISA? NOTE: This driver package is to be installed on: Not supported on SCO OpenServer 5.0.0 and 5.0.2 SCO OpenServer 5.0.4: No additional supplements are necessary SCO OpenServer 5.0.5: No additional supplements are necessary Supplements are downloadable from ftp.sco.com. SOLUTION: These drivers are available at the following URL: ftp://ftp.sco.com/pub/drivers To install these drivers, take the following steps: - Log in as root. - Download the volume image(s) to your machine to a directory, for example, /tmp/vol. - Run 'custom' and select 'Install New'. Install from your host machine using 'Media Images'. - Give the directory name where the volume images have been downloaded, for example, /tmp/vol. - Complete the installation and exit custom. - Install the network adapter hardware into your computer. - Run 'netconfig' and configure the new adapter.