Drivers for the Digital Semiconductor 2104x and 2114x Ethernet Controllers. KEYWORDS: openserver v5 osr5 d21x digital equipment dec semiconductor ethernet controller adapter drivers 5.0.4d bus pci 5.0.0 5.0.2 5.0.4 ahs advanced hardware 5.2 supplement ftp downloadable network 2104x 2114x 21040 21041 21140 21143/2 RELEASE: SCO OpenServer Enterprise System Release 5.0.0, 5.0.2, 5.0.4 SCO OpenServer Desktop System Release 5.0.0, 5.0.2, 5.0.4 SCO OpenServer Host System Release 5.0.0, 5.0.2, 5.0.4 SCO Internet FastStart Release 1.0.0, 1.1.0 HARDWARE: Digital Semiconductor 21040 based Ethernet Controller Digital Semiconductor 21041 based Ethernet Controller Digital Semiconductor 21140 10/100 Ethernet Digital Semiconductor 21143/2 10/100 Ethernet NOTE: The compatible bus type for this driver is PCI. PROBLEM: What driver is available for the Digital Semiconductor 2104x and 2114x Ethernet Controllers? NOTE: This driver package is to be installed on: SCO OpenServer 5.0.0: Release Supplement 5.0.0d (rs500d) Networking Supplement 1.0.0 (net100) SCO Advanced Hardware Supplement (AHS) 5.2 In this order. SCO OpenServer 5.0.2: SCO Advanced Hardware Supplement (AHS) 5.2 (available on 5.0.2 CD media) SCO OpenServer 5.0.4: No additional supplements are necessary SCO Internet FastStart Release 1.0.0, 1.1.0 Supplements are downloadable from ftp.sco.com. You may install the 'Network' portion of SCO AHS 5.2 or just the Network Configuration Manager portion to obtain the minimal necessary networking software to configure this driver. SOLUTION: These drivers are available at the following URL: ftp://ftp.sco.com/pub/drivers To install these drivers, take the following steps: - Log in as root. - Install SCO AHS Release 5.2 if not already installed. For SCO OpenServer 5.0.0 and 5.0.2 only. - Download the volume image(s) to your machine to a directory, for example, /tmp/vol. - Run 'custom' and select 'Install New'. Install from your host machine using 'Media Images'. - Give the directory name where the volume images have been downloaded, for example, /tmp/vol. - Complete the installation and exit custom. - Install the network adapter hardware into your computer. - Run 'netconfig' and configure the new adapter.