Drivers for S3 Trio3D and S3 ViRGE chipset based video adapters. KEYWORDS: openserver v5 osr5 s3 trio3d virge based chipset adapters drivers 5.0.4d bus pci agp 5.0.0 5.0.2 5.0.4 5.0.5 ahs advanced hardware 5.2 supplement ftp downloadable virge/mx /dx/gx 375 385 gx2 357 vx 988 325 diamond multimedia systems inc stealth 3d 2000 3000 4000 compaq armada 7800 RELEASE: SCO OpenServer Enterprise System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO OpenServer Desktop System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO OpenServer Host System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 HARDWARE: S3 Trio3D S3 ViRGE/MX S3 ViRGE/DX/GX (375 & 385) S3 ViRGE/GX2 (357) S3 ViRGE/VX (988) S3 ViRGE (325) Compaq Armada 7800 (with S3 ViRGE/MX chipset) Diamond Stealth 3D 2000 Pro Diamond Stealth 3D 3000 Diamond Stealth 3D 4000 Hercules Terminator 128/3D NumberNine 9FX Reality 334 PCI and AGP STB Nitro 3D/GX NOTE: The compatible bus types for this driver are PCI and AGP. PROBLEM: What drivers are available for the S3 Trio3D and S3 ViRGE chipset based video adapters? NOTE: This driver package is to be installed on: SCO OpenServer 5.0.0: Release Supplement 5.0.0d (rs500d) Networking Supplement 1.0.0 (net100) SCO Advanced Hardware Supplement (AHS) 5.2 The vesa graphics driver in this order. SCO OpenServer 5.0.2: SCO Advanced Hardware Supplement (AHS) 5.2 (available on 5.0.2 CD media) The vesa graphics driver in this order. SCO OpenServer 5.0.4: The vesa graphics driver SCO OpenServer 5.0.5: No additional supplements are necessary Supplements are downloadable from ftp.sco.com. You may install the 'Graphics' portion of SCO AHS 5.2 or just the Video Configuration Manager portion to obtain the minimal necessary graphics software to configure this driver. The S3 Trio3D and ViRGE use the VESA BIOS to create the grafinfo configuration file for this accelerated XDriver. 'The vesa graphics driver' must be installed on SCO OpenServer 5.0.0, 5.0.2 and 5.0.4 systems for this to work. SOLUTION: These drivers are available at the following URL: ftp://ftp.sco.com/pub/drivers Modifications ************* 5.3.1a - created 5.3.1b - Limit refresh frequencies for 1600x1200 modes based on what the virge chipset RAMDAC supports. To install these drivers, take the following steps: - Log in as root. - Install SCO AHS Release 5.2 if not already installed. This applies to SCO OpenServer 5.0.0 and 5.0.2 only. - Install 'The vesa graphics driver' if not already installed. This applies to SCO OpenServer 5.0.0, 5.0.2 and 5.0.4. - Download the volume image(s) to your machine to a directory, for example, /tmp/vol. - Run 'custom' and select 'Install New'. Install from your host machine using 'Media Images'. - Give the directory name where the volume images have been downloaded, for example, /tmp/vol. - Install the hardware into your computer. - Run 'scoadmin video' and configure the new adapter. KNOWN BUGS: - S3 Trio3D chipset based adapters hang during X Server initialization if configured for 16M colors. Occurs in configurations, when a secondary video adapter (S3 Trio3D PCI) is installed in a system that already has an embedded video chipsets on the motherboard. Also occurs when a secondary video adapter (S3 Trio3D PCI) is installed in a system that has an empty AGP bus slot. This hang does not occur if you use an S3 Trio3D AGP adapter. S3 ViRGE chipset based adapters do not have this problem. If you experience this problem, select a resolution with fewer colors.