Drivers for S3 Savage 3D and Savage 4 chipset based video adapters. KEYWORDS: openserver v5 osr5 s3 savage 3D 86c391 4 video adapters drivers bus agp ftp downloadable chipset hercules terminator beast numbernine visual technology corp sr9 stealth 3 s540 5.0.0 5.0.2 5.0.4 5.0.5 ahs advanced hardware 5.2 supplement ftp downloadable RELEASE: SCO OpenServer Enterprise System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO OpenServer Desktop System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO OpenServer Host System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 HARDWARE: S3 Savage 3D (S3 86C391 chipset) S3 Savage 4 (S3 86C395/96/97 chipset) Diamond Stealth III S540 Hercules Terminator Beast Number Nine Visual Technology Corporation SR9 WARNING: S3 Savage 3D and 4 chipset based adapters including the Hercules and Number Nine may hang when configured to use the default generic VESA driver. This occurs due to a problem in the video adapter BIOS. When you install and configure this 'savage' accelerated driver, the hang does not occur. However, it is recommended that you, obtain the latest video adapter BIOS from the cards manufacturer to correct this problem. It usually occurs immediately. NOTE: The compatible bus types for this driver is AGP. PROBLEM: What drivers are available for the S3 Savage 3D and Savage 4 chipset based video adapters? NOTE: This driver package is to be installed on: SCO OpenServer 5.0.0: Release Supplement 5.0.0d (rs500d) Networking Supplement 1.0.0 (net100) SCO Advanced Hardware Supplement (AHS) 5.2 The vesa graphics driver in this order. SCO OpenServer 5.0.2: SCO Advanced Hardware Supplement (AHS) 5.2 (available on 5.0.2 CD media) The vesa graphics driver SCO OpenServer 5.0.4: rs504c - Release Supplement for SCO OpenServer Release 5.0.4 The vesa graphics driver SCO OpenServer 5.0.5: rs505a - Release Supplement for SCO OpenServer Release 5.0.5 Download Supplements from ftp.sco.com in the Supplements directory. You may install the 'Graphics' portion of SCO AHS 5.2 or just the Video Configuration Manager portion to obtain the minimal necessary graphics software to configure this driver. The S3 Savage driver uses the VESA BIOS to create the grafinfo configuration file for this accelerated XDriver. 'The vesa graphics driver' must be installed on SCO OpenServer 5.0.0, 5.0.2 and 5.0.4 systems for this to work. SOLUTION: These drivers are available at the following URL: ftp://ftp.sco.com/pub/drivers Modifications: ************** 5.3.1a: created 5.3.1b: Fix Diamond Stealth support - needed wait in SetText so text screen restores properly on exit or screen switch. To install these drivers, take the following steps: - Log in as root. - Download and install the appropriate release supplement or other additional software for your SCO OpenServer Release as specified in the NOTE above. - Download the volume image(s) to your machine to a directory, for example, /tmp/vol. - Run 'custom' and select 'Install New'. Install from your host machine using 'Media Images'. - Give the directory name where the volume images have been downloaded, for example, /tmp/vol. - Install the hardware into your computer. - Run 'scoadmin video' and configure the new adapter.