Drivers for ATI RAGE 128 based video adapters. KEYWORDS: openserver v5 osr5 ati rage 128 video based chipset adapters drivers 5.0.4d bus agp 5.0.0 5.0.2 5.0.4 5.0.5 ahs advanced hardware 5.2 supplement ftp downloadable r128 pro gl dvi RELEASE: SCO OpenServer Enterprise System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO OpenServer Desktop System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO OpenServer Host System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 HARDWARE: ATI RAGE 128 ATI RAGE 128 PRO GL *ATI RAGE 128 PRO GL (with DVI) * ATI RAGE 128 PRO GL (with DVI) has a digital flat panel port and a CRT port. The digital flat panel port was tested using a ViewSonic VPD150 ViewPanel monitor (maximum resolution 1024x768). NOTE: The compatible bus type for this driver is AGP. PROBLEM: What drivers are available for the ATI RAGE 128 video adapters? NOTE: This driver package is to be installed on: SCO OpenServer 5.0.0: Release Supplement 5.0.0d (rs500d) Networking Supplement 1.0.0 (net100) SCO Advanced Hardware Supplement (AHS) 5.2 in this order. SCO OpenServer 5.0.2: SCO Advanced Hardware Supplement (AHS) 5.2 (available on 5.0.2 CD media) SCO OpenServer 5.0.4: rs504c - Release Supplement for SCO OpenServer Release 5.0.4 SCO OpenServer 5.0.5: rs505a - Release Supplement for SCO OpenServer Release 5.0.5 Supplements are downloadable from ftp.sco.com in the Supplements directory. You may install the 'Graphics' portion of SCO AHS 5.2 or just the Video Configuration Manager portion to obtain the minimal necessary graphics software to configure this driver. SOLUTION: These drivers are available at the following URL: ftp://ftp.sco.com/pub/drivers Modifications: ************** 5.3.1a: created 5.3.1b: Add support for ATI RAGE 128 PRO GL adapters. To install these drivers, take the following steps: - Log in as root. - Install SCO AHS Release 5.2 if not already installed. This applies to SCO OpenServer 5.0.0 and 5.0.2 only. - Download the volume image(s) to your machine to a directory, for example, /tmp/vol. - Run 'custom' and select 'Install New'. Install from your host machine using 'Media Images'. - Give the directory name where the volume images have been downloaded, for example, /tmp/vol. - Install the hardware into your computer. - Run 'scoadmin video' and configure the new adapter. WARNING: During an upgrade or fresh installation: ATI RAGE 128 video adapter stops boot at logo or screen goes black during ISL. If your UnixWare 7 or SCO OpenServer system fails to boot (screen goes black or boot is stopping at the UnixWare 7 logo) and you are using the ATI RAGE 128 video adapter, contact ATI Technical Support. More information is available at: http://support.atitech.ca/infobase/3439.html This problem does not occur with later versions of the ATI RAGE 128 adapter.