Driver for NeoMagic chipset based video adapters. KEYWORDS: openserver v5 osr5 video based adapters drivers 5.0.4d bus pci 5.0.0 5.0.2 5.0.4 5.0.5 ahs advanced hardware 5.2 supplement ftp downloadable laptop neomagic magicgraph128V nm2090 magicgraph128zv+ nm2097 magicgraph128ZV nm2093 magicgraph128XD nm2160 magicmedia256AV nm2200 RELEASE: SCO OpenServer Enterprise System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO OpenServer Desktop System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 SCO OpenServer Host System Release 5.0.0, 5.0.2, 5.0.4, 5.0.5 HARDWARE: NeoMagic MagicGraph128V (NM2090 chipset) NeoMagic MagicGraph128ZV (NM2093 chipset) NeoMagic MagicGraph128ZV+ (NM2097 chipset) NeoMagic MagicGraph128XD (NM2160 chipset) NeoMagic MagicMedia256AV (NM2200 chipset) Laptops Tested: *************** COMPAQ Presario 1230 w/ NeoMagic MagicGraph128ZV+ COMPAQ Presario 1655 w/ NeoMagic MagicGraph128XD CTX EzBook 800 series w/ NeoMagic MagicGraph128XD Dell Latitude CP w/ NeoMagic MagicGraph128XD Digital HiNote VP w/ NeoMagic MagicGraph128ZV IBM ThinkPad 380Z w/ NeoMagic MagicMedia256AV Toshiba Tecra 8000 w/ NeoMagic MagicMedia256AV NOTE: The compatible bus types for this driver are PCI. PROBLEM: What drivers are available for the NeoMagic chipset based video adapters? NOTE: This driver package is to be installed on: SCO OpenServer 5.0.0: Release Supplement 5.0.0d (rs500d) Networking Supplement 1.0.0 (net100) SCO Advanced Hardware Supplement (AHS) 5.2 in this order. SCO OpenServer 5.0.2: SCO Advanced Hardware Supplement (AHS) 5.2 (available on 5.0.2 CD media) SCO OpenServer 5.0.4 and 5.0.5: No additional supplements are necessary Supplements are downloadable from ftp.sco.com. You may install the 'Graphics' portion of SCO AHS 5.2 or just the Video Configuration Manager portion to obtain the minimal necessary graphics software to configure this driver. SOLUTION: These drivers are available at the following URL: ftp://ftp.sco.com/pub/drivers To install these drivers, take the following steps: - Log in as root. - Install SCO AHS Release 5.2 if not already installed. For SCO OpenServer 5.0.0 and 5.0.2 only. - Download the volume image(s) to your machine to a directory, for example, /tmp/vol. - Run 'custom' and select 'Install New'. Install from your host machine using 'Media Images'. - Give the directory name where the volume images have been downloaded, for example, /tmp/vol. - Install the hardware into your computer. - Run 'scoadmin video' and configure the new adapter. NOTE: Device drivers for listed chip sets are certified to manufacturers' reference circuitry. However, SCO drivers are not tested on all hardware platforms and may not work for supported chip sets in some hardware implementations. If you experience problems with a particular chip set, contact SCO Support Services or your SCO distributor for more information.