tls711 - provides the UnixWare 7 DHCP Client for SCO OpenServer 5.0.5 and 5.0.6 INSTALLATION: - Place tls711.tar.Z in /, then run the following commands: # cd / # uncompress tls711.tar.Z # tar xvf tls711.tar This will install the files: /tmp/dhcpc/README /tmp/dhcpc/ip/space.c /tmp/dhcpc/ip/Driver.o /tmp/dhcpc/udp/space.c /tmp/dhcpc/udp/Driver.o /tmp/dhcpc/dhcpc-etc/dhcpc /tmp/dhcpc/dhcpc-etc/dcc /tmp/dhcpc/dhcpc-etc/dhcpc.conf /tmp/dhcpc/dhcpc-etc/dhcpc.d/dupdate /tmp/dhcpc/dhcpc-etc/dhcpc.d/dynamic /tmp/dhcpc/dhcpc-etc/dhcpc.d/netopts /tmp/dhcpc/dhcpc-etc/dhcpc.d/resolver /tmp/dhcpc/dhcpc-etc/dhcpc.d/route /tmp/dhcpc/dhcpc-etc/dhcpc.d/time /tmp/dhcpc/dhcpc-etc/dhcpc.d - FOR RELEASE 5.0.5 ONLY: Make backup copies of the 'ip' and 'udp' driver files in /etc/conf/pack.d, then copy the new versions from /tmp/dhcpc/ip and /tmp/dhcpc/udp to their respective locations under /etc/conf/pack.d: ip/Driver.o ip/space.c udp/Driver.o udp/space.c Driver support for the DHCP client already exists in release 5.0.6, so this step will not be necessary for systems running that version. - Copy the DHCP binaries, shell scripts and configuration files into place: cd /tmp/dhcpc/dhcpc-etc find . -depth | cpio -pdmv /etc - If you installed new drivers, relink the kernel by running '/etc/conf/cf.d/link_unix -y', and reboot the system. - Edit /etc/dhcpc.conf. The file contains sample configurations which can be uncommented and modified as needed. - Run "/etc/dcc start". To have this command run at boot time, edit /etc/tcp, comment out the interface configuration commands (i.e., "ifconfig net0", "route add", etc), and replace them with "/etc/dcc start" Evan Hunt