*************************************************************************** * The files offered in the Technical Library Supplements (TLS) * * directory are for experimental or educational use only. They * * are provided "AS IS" to knowledgeable users as a courtesy. * * They are NOT supported by SCO Support Services. All use of * * this material is the sole responsibility of the user. See the * * associated "README" or "info" files located in the TLS directory * * on SCO's Online Support (SOS) system for further information. * *************************************************************************** Boot/Root floppy set to test RTC and BIOS of your SCO System ============================================================= This TLS consists of 2 floppies, a Boot and a Root floppy. The TLS only supports systems that have a 3.5" primary floppy drive with a capacity of at least 1.44Mb. This TLS is suitable for use on SCO System V/386 Release 3.2 base systems including: SCO OpenServer Release 5.0.x SCO Open Server Release 3.0 SCO Unix System V/386 Release 3.2v4.x SCO Xenix System V/386 Release 2.3.4 It can also be used to test SCO UnixWare 2.x and UnixWare 7 based systems. Although the level of testing is not as accurate for these systems, it is still felt that the TLS provides a good test of the RTC hardware of UnixWare based systems. To test the RTC and BIOS on your system, use dd(C/1) to place the images onto 1.44Mb 3.5 Inch floppy disks. Shutdown your SCO system and place the Boot floppy into the floppy drive. Reboot the system, press at the Boot: prompt and replace the Boot floppy with the Root floppy and hit Return when prompted to. A generic kernel (which is quite large) will be loaded from the Root floppy into memory. Dots (......) are displayed while the kernel is loaded. A program on the Root floppy called /bin/check-rtc will be run automatically to test the RTC of your SCO System. The tests performed are: 1) A test to check if your system uses a 2 digit or a 4 digit RTC. A 2 digit RTC updates the Year field in the CMOS but does not update the Century byte. A 4 digit RTC updates both the Year and Century bytes. All SCO Operating Systems will function correctly with 2 digit and 4 digit RTCs. If your system has a 2 digit RTC then the century byte will not be used in the two following tests. 2) A test to see if the RTC can successfully roll over from the 31st of December 1999 to the 1st of January 2000. A green PASSED message indicates that the test was a success. A red FAILED message indicated that your RTC is faulty and your hardware needs to be replaced in order to function correctly on rollover to the year 2000. 3) A test to see if the RTC can successfully roll over from the 28th of February 2000 to the 29th of February 2000. A green PASSED message indicates that your RTC recognises 2000 as a leap year. A red FAILED message indicates that your RTC is faulty and your hardware needs to be replaced. NOTE: You should not run check-rtc on a live system. If you do run this binary you risk corrupting data on your system and possibly causing your applications to fail. NOTE: All tests are using a GMT TZ environment variable. This will not affect the timezone setting of the SCO Operating System on the hard drive of your SCO Server. NOTE: If your system fails to boot using the tls620.boot floppy, it is likely that there is an incompatibility between the hardware and the TLS. If you are testing an SCO OpenServer Release 5 system, you should try create your own boot floppy using the "mkdev fd" command to see if this boot floppy will allow you to run the tests. (Thanks to David Clayton for this information). When these tests are complete you will be provided with a # shell prompt. To test the BIOS of your PC, do the following: Set the RTC and System Clock of the system to 11:59pm on the 31st December 1999 using the command: date -t 199912312359 Shutdown the system using the command: haltsys Power off the system and wait for 60 seconds before rebooting. Place the Boot floppy in the floppy drive and reboot. Press at the Boot: prompt. Replace the Boot floppy with the Root floppy when prompted to and hit . The check-rtc program will run once again. Check to see that the check_rtc program message: "Restoring original RTC values (RTC now reads 01/Jan/2000 00:mm)" where mm represents a number of minutes. If the date restored into the RTC is not the 1st of Jan 2000 then the likelyhood is that the BIOS of the PC has corrupted the RTC of your system and you will need to replace/upgrade the BIOS or the PC to resolve the problem. Before you reboot use date(C) to reset the RTC to the correct date and time. The format of the date(C) command is: date -t [CC]YYMMDDhhmm[.SS] where setting of the century [CC] and seconds [.SS] are optional. Once you have reset the time and date to their correct values, remove the Root floppy from the drive and use haltsys to reboot your system. Please send comments, suggestions and criticisms to jboland@sco.com DISCLAIMER: SCO does not guarantee accuracy, adequacy or completeness of the features provided by this program. SCO MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AS TO RESULTS TO BE OBTAINED BY ANY PERSON OR ENTITY FROM USE OF THE CONTENTS OF THIS PROGRAM. SCO MAKES NO EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF ANY PRODUCT MENTIONED IN THIS PROGRAM.