SCO CMW+ 3.0.1 Release Supplement 1 Release Notes ================================================= 4 Apr 1995 Dear SCO CMW+ Customer, The enclosed SCO CMW+ Release Supplement 1 provides replacements for several files on your SCO CMW+ 3.0.1 system. It improves elements of the trusted networking subsystem, the X window system graphical user interface, the backup subsystem, the printing subsystem, and certain commands. For a complete list of the fixes contained in this Release Supplement, see the Appendix. SCO CMW+ 3.0.1 Release Supplement 1 will install on SCO CMW+ 3.0.1. SCO CMW+ 3.0.1 Release Supplement 1 is custom(ADM) installable. SCO CMW+ 3.0.1 Release Supplement 1 consists of three floppy volumes. These Release Notes include complete step-by-step instructions for installing SCO CMW+ 3.0.1 Release Supplement 1. If you have any questions, please call contact your local SCO Distributor or SCO Support. We appreciate your business. SCO MR:mjr/1995-04-04 INSTALLATION INSTRUCTIONS ========================= To install SCO CMW+ 3.0.1 Release Supplement 1, take the following steps. Before beginning installation, locate and have ready the card containing the serial number/activation key pair that was used to activate the system you are updating. 1. Log into the system as an administrative user (one possessing the "sysadmin" command authorization). In the shipped configuration, the "root" user has this authorization. 2. Bring the system to single-user mode by selecting the "Single User Mode" option from the Trusted Path Menu. 3. Enter the command: custom 4. The main custom menu will appear. Press to select "Install". 5. A window of options opens in the lower right-hand corner of the screen. Press again to select "A New Product" from among these options. 6. The next screen highlights the "Entire Product" option. Press to select this option. 7. Custom prompts you to insert Floppy Volume 1. Insert the "SCO CMW+ 3.0.1 Release Supplement 1 volume 1" floppy in the primary floppy drive and press . You will see the message: Installing custom data files... followed by: Executing Product Prep Script. 8. The Prep Script will check the version of the operating system. If the operating system is the version for which this release supplement is intended, the script will inform you of its intentions and display this prompt: Press Enter to Continue: 9. If the operating system does not appear to be the version for which this release supplemeent is intended, a warning message is displayed and you are given the option of continuing or aborting the installation. You should probably not install this release supplement on the system in this case. Simply press to abort the installation. If you wish to override the warning and force the installation of the release supplement, enter "Y" and press . 10. If you did not install Trusted NFS when originally loading your SCO CMW+ 3.0.1 system, a message is displayed warning that if you install TNFS at a later time, you will need to reinstall this Release Supplement. Press to continue. 11. You are asked if you wish to save backup copies of the files replaced by this Release Supplement. If you do, answer 'y' at the prompt. Otherwise, answer 'n'. Note that installation of this Release Supplement is irrevocable if you answer 'n' to this prompt. 12. Custom will display the message "Creating files list ..." in the top left hand corner of the screen. 13. The following prompt is displayed: Insert: SCO CMW+ 3.0.1 Release Supplement 1 Floppy Volume 1 Ensure that the correct volume is still in the floppy drive and press to select "Continue". 14. Custom will display the message: Extracting files ... followed by: Insert: SCO CMW+ 3.0.1 Release Supplement 1 Floppy Volume 2 Remove volume 1, insert volume 2, and press to select "Continue". 15. Custom will again display the message: Extracting files ... followed by: Insert: SCO CMW+ 3.0.1 Release Supplement 1 Floppy Volume 3 Remove volume 2, insert volume 3, and press to select "Continue". 16. Custom will once again display the message: Extracting files ... followed by: Executing SCO CMW+ 3.0.1 Release Supplement 1 Init Script The Init Script will display some progress messages. The system's serial number will be displayed, and you will be prompted for the activation key. Supply the same activation key that was used during the original installation of this system. The Init Script will then display more progress messages. Note that the "Removing entries from perms lists . . ." phase may take several minutes to complete. 17. You are then informed that the kernel must be relinked to enable parts of this Release Supplement. To relink the kernel now, answer 'y'. To defer the kernel relink, answer 'n'. 18. If you answered 'y', the kernel is relinked, and a message is displayed reminding you that you need to reboot the system to activate the new kernel. Press to continue. 19. Custom will display the message "Checking file permissions ..." briefly, followed by a screen listing the output of setfiles(ADM). Press to get back to the "Products Currently Installed" screen. To exit the custom(ADM) utility, press the q key or use the left arrow key to select "Quit" and press . Custom asks you to verify that you wish to exit the program; press to select "Yes". 20. Remove the floppy from the disk drive. Issue the command: reboot to reboot the system with the new kernel. Appendix: Complete List of Fixes ================================== SCO CMW+ 3.0.1 Release Supplement 1 provides the following fixes. The defect number is an internal SecureWare identifier, which you should reference if you have questions about a specific fix. Defect Description 3810 Allow select() to function on security policy devices 4151 Correct intermittent UDP failures 4600 Allow chgrp to belonged-to group other than current egid 5030 Improve MaxSix UDP reliability 5202 Provide support for OSI hostname<->address mapping 5459 Prevent interference by OSI requests from unknown host 5622 Correct Xnsoi RHDB help screen 5783 Enable tar functionality for unprivileged users 5891 Replace explicit checks for root user in kernel 5898 Enable su(ADM) to raise clearance 5944 Add "Rebuild User Environment" to TP Menu 5959 Set default double-click-to-close Mwm behavior 6006 Remove obsolete audit_* files 6049 Provide consistent "last login" report in su(ADM) 6053 Add "filesysops" privilege to mount(ADM) command 6054 Improve error recovery in account creation process 6068 Improve trustedprocess error handling in setlevel(C) 6069 Allow renaming of TNFS-mounted files 6082 Allow normal user to set own initial password 6089 Avoid possible panic situation with OSI communications 6102 Provide lp support for "label" and "filter" command authorizations 6115 Enable Information Label Builder behavior 6131 Enable recognition of OSI wildcard address 6162 Remove obsolete XDeskTop control applications 6176 Allow tar/cpio to work without syshi clearance 6185 Replace obsolete uid<100 checks in cpset(C) 6189 Update emergency boot floppy creation process 6193 Correct channel labels on lp banner/trailer pages 6201 Remove unsupported TFTP client application 6223 Remove possible source of panic in multiprocessor system 6242 Provide statically linked file management commands 6243 Allow receipt of broadcast packets from DNSIX hosts 6267 Improve user authentication error handling 6268 Allow programmatic manipulation of OSI hostname table 6270 Avoid possible memory fault in XAuthMgr 6308 Remove obsolete ASCII-based ACL management application 6313 Avoid possible auditing panic 6328 Improve handling of TCP accreditation range errors 6346 Prevent mismatched OSI connections within accred. range 6389 Allow creation of files on remote TNFS filesystem 6390 Correct access checking on NFS files 6434 File control database fix for D6102 6442 Avoid coredump situation in the Trusted X File Manager 6507 Clean up creation of Emergency Boot Floppy