Subj: tls042 - USR 144 Sportster dialer This tls will provide a high speed, reliable dialer for USR 144 Sportster and USR 144 Sportster fax modems. It will most likely work for Couriers with no modifications. This will enable you to use cu, uucp and ppp at full speed. In addition, it will allow dialin users to get a clean prompt right away with no hassles. For those of you technically inclined, the dialer binary is general purpose and doesn't have any sportster specific settings hard coded. All it does is lock the DTE rate at 38400 and translate all modem connect messages to report a 38400 connection. Only the configuration file in /etc/default would need to be modified to make this work for another modem. The only requirement is that it support a fixed DTE rate and automatically set the DCE rate as needed by the remote modem. Since unix sees only a 38400 baud device, there is no need for gettydefs baud cycling. In addition, outbound calls don't need to specify a baud rate. Source is included for reference. The only thing interesting in the /etc/default/atdialUSR144 parameter file are the extreme measures used to make sure the sportster gets reset (S13 settings). Those are necessary because some ROM versions have trouble recognizing a dial tone after a cold power on. Fully resetting the modem avoids this problem. questions/comments to darrent@sco.com