System Security Enhancement (SSE) 013 - 10 July 1998 Problem: Several problems have been identified in the pop server provided with several SCO Operating Systems that may result in either denial of service attacks or root access security violations. Patch: A replacement binary is supplied for each of the following SCO operating systems: SCO OpenServer Releases 5.0.0, 5.0.2, 5.0.4 SCO Internet FastStart Releases 1.0, 1.1 Other SCO Operating Systems are not vulnerable either because they do not contain a pop server or they contain one that is not vulnerable. This includes SCO UnixWare and CMW+. Installation: Perform the following steps logged in as root: 1. Create a temporary directory, and copy sse013 into it: # mkdir /tmp/sse013 # cp sse013.tar.Z /tmp/sse013 2. Extract files from the tar file: # cd /tmp/sse013 # uncompress sse013.tar.Z # tar xvf sse013.tar 3. At this point you will have a file called "popper" in this directory. To disable the old popper and install the new pop server, execute the following commands # cp /etc/popper /etc/popper- # chown root:root /etc/popper- # chmod 000 /etc/popper- # cp /tmp/sse013/popper /etc/popper # chown bin:bin /etc/popper # chmod 755 /etc/popper The first three commands disable the old popper. The second set of three install the new popper. You may want to just remove the old popper at your discretion to prevent possible future security issues. If you choose not to delete the file, be sure to follow the first three steps. 4. Remove the /tmp/sse013 directory # cd / # rm -rf /tmp/sse013 Disclaimer: SCO believes that this patch addresses the reported vulnerability. However, in order that it be released as soon as possible, this patch has not been fully tested or packaged to SCO's normal exacting standards. For that reason, this patch is not officially supported. Official supported and packaged fixes for current SCO products will be available in due course.