Dear SCO Customer: Enclosed is Support Level Supplement (SLS) xnx129 Revision B that contains a new set of Honey-Danber (HDB) UUCP binaries for SCO XENIX 386 Operating System Releases 2.3.0, 2.3.1, and 2.3.2. This SLS corrects the following problems and includes the following for SCO XENIX 386 Operating System Releases 2.3.0, and 2.3.1: 1. Incorrect reporting of xferstats. 2. Occasional core dumps and "INTEREXIT" problems with uucico. 3. New 386 dialer binaries for all dialer programs. This SLS corrects the following problems with the UUCP package in SCO XENIX 386 Operating System Release 2.3.2: 1. Core dumps of the uusched program. 2. Provides an unstripped uucico binary for users of SCO XENIX 386 Operating System Release 2.3.2 for Micro Channel Architecture machines. For each release of SCO XENIX listed above, SLS xnx129 Revision B provides several new uudemon programs which eliminate the problem that caused the home directories of UUCP pseudo-users to be removed. Also, during the installation of SLS xnx129 Revision B, you are allowed to choose which user will receive mail from the uudemon programs. Formerly, this mail always went to the user "uucp," and normally no one logs in as uucp, hence the mail was never read. For more information on the uudemon programs, see the SCO XENIX System Administrator's Guide, Chapter 11, "Administering your System." The net affect of installing this SLS is to overlay the current UUCP package with a corrected version of the UUCP package from SCO XENIX 386 Operating System Release 2.3.2. UUCP configuration files, of course, will not be affected. The directions for installation are as follows: 1. Reboot your system and enter System Maintenance Mode. 2. If you have already installed SLS xnx129 Revision A, remove the file /etc/perms/xos.UUC. If you have not installed SLS xnx129 Revision A, this file will not be on your system. 3. Make sure that the UUCP package is fully installed. If it is not, please install it with the custom(ADM) utility. 4. Insert the enclosed disk (Volume 1) into the primary floppy drive and close the door. 5. Type "custom" at the prompt. 6. Choose #4, "Add a Supported Product" 7. You will see the message: Insert distribution volume 1 and press or enter q to quit: At this point, verify that the floppy is in the drive and press . 8. You will see the message: Initializing before installation of HDB UUCP binaries.... 9. The System will now be checked for the existence of files needed prior to the installation of this SLS. Follow the directions printed on the screen should one of these tests fail. 10. You will then see messages stating what files are changed during the installation of this SLS. You will be asked: Do you wish to continue? (y/n) Enter the appropriate response based on the information displayed on the screen. 11. If you do not have enough disk space, you will be warned of this and given a chance to abort the installation. 12. At this point you will see the message: Insert Operating System (Update) Volume UUC1 and press or enter q to quit: Make sure the enclosed disk (Volume 1) is in the drive and press . If you are installing the SLS with 3.5 inch diskettes, you will see the following message after custom is finished extracting files from the first diskette: Insert Operating System (Update) Volume UUC2 and press or enter q to quit: At this point, insert the second disk (Volume 2) and press . 13. When custom is finished retrieving files from the disk, you will see the message: Enter user name: [root] At this point, enter the login name that you want to receive mail from the uudemon programs. If you do not use the uudemon programs, it is safe to just press here. 14. The system will next display the message: "Checking file permissions..." You will then be presented with a menu. Choose "q" to quit. The new UUCP package is installed. If at any point during the installation you see the message "/etc/perms/xos.UUC already exists," remove the file /etc/perms/xos.UUC before reinstalling this SLS. Reinstallation of this SLS will overwrite any original files that were saved in /tmp/uucp in a previous installation attempt. If at any point during the installation you see the message "Error: /tmp/perms/prep.xos failed," then follow the instructions printed just prior to this message to diagnose the situation. The installation of this SLS will not affect UUCP configuration files. If you have any questions, please call our SCO Customer Services Department at (800) 347-4381. SCO Customer Service is available Monday through Friday, 6 A.M. to 5 P.M., Pacific Time. We appreciate your business. SCO Support Services