Dear SCO Customer, The enclosed Support Level Supplement (SLS) UOD464A contains a new kernel module to address potential problems when reading from or writing to devices on multiprocessor systems that use CPUs with speeds of 200mhz or greater. The error message "Waiting at interrupt time" may occur and the system may hang. This SLS applies to these SCO UNIX Version 4.2 based operating systems: SCO UNIX System V/386 Release 3.2 Operating System Version 4.2 SCO MPX Release 3.0.0 SCO Open Desktop Lite Release 3.0 SCO Open Desktop Release 3.0 SCO Open Server Network System Release 3.0 SCO Open Server Enterprise System Release 3.0 INSTALLATION INSTRUCTIONS 1. Prepare the media for installation. Download the UOD464A media image file (uod464a.Z file), place the file in the /tmp directory, uncompress and dd the file to a formatted floppy by typing the following commands: uncompress /tmp/uod464a.Z dd if=/tmp/uod464a of=/dev/rfd0135ds18 2. If the system is running in multiuser mode, log in as root on the console. After warning the users that the system will be down for some time, enter the command: shutdown -y -g0 su 3. When the system enters single-user mode, you will see the message: Type CONTROL-d to proceed with normal startup, (or give root password for System Maintenance): Enter the root password and press . Wait until the "#" prompt appears. 4. Insert disk in the floppy disk drive and enter the command: /etc/custom The custom menu will appear. 5. To select the following, highlight each one with the cursor keys and press : Install-> A New Product-> Entire Product - Position the cursor so that "Install" is highlighted and press . - Make sure that the words "A New Product" are highlighted in the window found in the lower right corner of the screen; press . - Make sure the words "Entire Product" are highlighted in the "Choose an option" section of the screen; press . - You will be prompted to "Insert distribution Volume 1 and press ". Make sure the disk is already in the drive and press - You will see these messages: Installing custom data files Executing Product Prep Script - The message "Saving files about to be Replaced" will flash on the screen. You will be prompted to "Insert the requested Volume and press ". The disk is already in the drive, therefore press . - You will see this message: Extracting Files - When asked if you wish to relink the kernel, reply "Y" in order to ensure that the modifications from SLS UOD464A are included in the kernel. Answer "y" when asked if you want the kernel to boot by default. Answer "y" when asked if you want the kernel environment rebuilt. - You will then be prompted to "Press any key to continue"; press . - At the main custom menu, move the highlighted entry to "Quit" and press . Press again on the highlighted "yes." - Reboot the computer. - SLS UOD464A is now successfully installed. If you have any questions regarding this SLS, or the product on which it is installed, please contact your software supplier. We appreciate your business. SCO Support Services