Dear SCO Customer, Enclosed find Support Level Supplement (SLS) unx251. This SLS resolves outstanding problems with the SCO UNIX Operating System Release 3.2 Version 2.0 GT. These problems will be fixed in the upcoming release for computers based on Micro Channel Architecture so the supplement will only be required for Industry Standard Architecture (AT) based computers. The Supplement is also not applicable to Operating Systems with SCO MPX installed. The following problems are resolved by installing SLS unx251: 1) Processes using the plock() system call would hang indefinitely. Ps(C) would show the process state as "B" when this occured. 2) Under a rare set of conditions, the in-core inode table would appear to end up with an invalid entry. In actuality, the problem was with the directory name cache scheme which was added to improve performance in the SCO UNIX System V/386 Operating System Release 3.2 Version 2.0 - hence fsck would not detect an error. 3) 14 character directory names could not be renamed. INSTALLATION INSTRUCTIONS ============================= To install SLS unx251, insert the floppy into your floppy drive and, at a root prompt, type: /etc/xinstall You will see the following message: For each volume in the distribution set, insert the floppy into the drive, enter 'y', and press . Enter the letter 'n' after the last volume. Should you see the message 'tar: please mount new volume' insert the next floppy, and press . First Floppy? (y/n) At this point enter 'y' and press . You will then see the message: Extracting files... If you do not have the LINK kit installed, you will be prompted with the following message: You must have the LINK kit installed Do you wish to install the LINK kit now (y/n) Enter 'y' and then . You will then be prompted for the diskettes, and the serial number and activation key, all of which were supplied with your SCO UNIX System V/386 Operating System Release 3.2 Version 2.0. Once this process is complete, or if you already have the LINK kit installed on your system, you will then see the following messages: Backing up /etc/conf/pack.d/kernel/os.o /etc/conf/pack.d/kernel/os.o.bak Backing up /etc/conf/pack.d/s5/Driver.o /etc/conf/pack.d/s5/Driver.o.bak Backing up /usr/include/sys/nami.h /usr/include/sys/nami.h.bak The UNIX Operating System will now be rebuilt. This will take a few minutes. Please wait. Root for this system build is / The UNIX Kernel has been rebuilt. Do you want this kernel to boot by default (y/n) Enter 'y' followed by . You will see the message: Backing up /unix to /unix.old Installing new /unix The kernel environment includes device node files and /etc/inittab. The new kernel may require changes to /etc/inittab or device nodes. Do you want the kernel environment rebuilt? (y/n) Enter 'n' followed by and you will see the message: Device node or inittab changes associated with this new kernel have not been made. These changes should be made by running touch /etc/new_unix; /etc/conf/bin/mkenv. Next Floppy? (y/n) At this point, enter 'n' followed by . You must now reboot the system so that the changes made by SLS unx251 can take effect. To shutdown your system, first make certain that all users are logged off the system; then enter the command: shutdown -g0 -y The fix will take effect when your system is rebooted. Note that if you re-install your LINK kit, you will need to re-install SLS unx251. If you have any questions please call our SCO Customer Services Department at (800) 347-4381. SCO Customer Service is available Monday through Friday 6:00 A.M. to 5:00 P.M. Pacific Time. We appreciate your business. SCO Support Services