Dear SCO Customer, Support Level Supplement (SLS) CMW487A allows the installation of SCO system software on systems implemented with faster CPUs and an AMI keyboard BIOS. In this case, faster CPUs can generally be defined as systems employing a Pentium processor executing at 75Mhz or faster. The problem occurs when the keyboard locks up and no longer handles keyboard events. SLS CMW487A can only be installed on the SCO CMW+ Release 3.0 product. SLS CMW487A contains a Boot Time Loadable Driver (BTLD), the "kbp" BTLD. To use BTLDs a command is entered at the "Boot:" prompt. To properly install this BTLD, follow these directions: If the kbp BTLD is the only BTLD being used, use this command: Boot : defbootstr link="kbp" If more than one BTLD will be used, use this command: Boot : defbootstr link="kbp other-btld" For example, if the system software is installed from a CD-ROM on an Adaptec 2940, this command line would be used: Boot : defbootstr link="kbp alad" The message "Characteristic 'B' not supported; ignored" may be displayed. This message can be safely ignored and will not adversely affect the operation of the BTLD. Note: Wait for the installation program to prompt for disk changes. Do not change floppies until instructed. When a BTLD is installed, the appropriate components are installed into the link kit. By placing the components in the link kit, all subsequent kernel links will contain the BTLD modules. Therefore, when a driver is added or removed from the system, the proper BTLD components continue to be present in the newly built kernels. If your system has already been installed and you want to add the kbp package, use the "installpkg" command. Insert the kbp BTLD disk, SLS CMW487A, in your floppy drive and type "installpkg." After the driver is installed, activate it by editing the file /etc/conf/sdevice.d/kbp. The file will contain one line like this: kbp N 1 5 0 0 0 0 0 0 Change the "N" to a "Y" so it looks like this: kbp Y 1 5 0 0 0 0 0 0 Link a new kernel by typing /etc/conf/cf.d/link_unix. The new driver will take effect the next time you reboot. If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier. We appreciate your business. SCO Support Services