SCO UNIX and SCO Open Desktop Supplement for IBM Model 35/40/L40 The enclosed disks provide additional support for SCO UNIX System V on the following IBM Personal System/2 models: 35 SX 043, 40 SX 043, 40 SX 045 and L40 SX These PS/2 models use the Industry Standard Architecture (ISA or AT architecture). Install SCO UNIX System V/386 Release 3.2 Operating System Version 2.0 for 386GT platforms using this supplement. SCO UNIX for 386MC platforms and SCO UNIX releases prior to 3.2 Version 2.0 are not supported with this supplement. Open Desktop is not supported on these models due to their 40MB primary disk drives. However, it is possible to partially install SCO Open Desktop Release 1.1 for 386GT platforms on these models. SCO Open Desktop Release 1.0 and SCO Open Desktop for 386MC platforms are not supported. The package consists of 2 disks: a replacement N1 (Boot) disk to be used in place of the one supplied with the Operating System package, and a LINK kit update disk to modify the appropriate drivers. INSTALLATION ------------ 1. Install the Operating System on the machine as normal, using the replacement N1 (Boot) disk in place of the standard N1. 2. Boot the system and enter System Maintenance mode by entering the root password at the prompt. 3. If you are installing Open Desktop, skip to step 4. The LINK kit is installed automatically by the Open Desktop installation process and must not be reinstalled. Install the Operating System LINK kit using custom(ADM), as follows: a. Run /etc/custom b. At the menu, choose "Install" c. Choose "SCO UNIX System V Operating System" from the point-and-pick list d. At the following menu, choose "Service Components". You must use the arrow keys to make this choice, since typing "S" selects "Services" e. Choose "SCO UNIX System V Extended Utilities" from the point-and-pick list f. At the next menu, choose "Packages" g. Choose "LINK" from the point-and-pick list. "LINK" is at the end of the list, out of alphabetical order. h. custom will then prompt for one or more volumes of your Operating System distribution. i. After reading the Operating System disks, custom prompts for your Operating System serial number and activation key. Enter these carefully from the Activation Key card provided with the Operating System. j. When serialization is complete, quit the custom menu. 4. Install the LINK kit update disk using xinstall(ADM) as follows: a. Run /etc/xinstall. b. You will see the message: First Floppy? (y/n) Answer "y" and enter c. You will then see the message: Installing IBM Model 35/40/L40 Supplement d. If the LINK kit is not installed you will be given a chance to install it now. However, it should already be installed due to the previous steps. e. The LINK kit update is installed and you will see the message: Next Floppy? (y/n) Enter "n" and then f. You will see the message: Installation complete You will then be returned to the system prompt. The system is now ready for the installation of any additional packages. If you have any questions, please contact your support provider.