IMPORTANT NOTES For the EVC Adapter Supplement The Santa Cruz Operation(r) is pleased to ship you this release of the EVC (Enhanced Video Controller) Adapter Supplement. This software sup- plement allows you to take advantage of the features of the EVC-1 Video Controller. These notes provide instructions for installing the EVC Adapter Supplement. Refer to your hardware documentation for more information about the EVC-1 controller. 1. Configuration Requirements The supplement requires one of the following software platforms: o SCO(r) UNIX System V/386 Release 3.2 Version 2.0 with SCO Xsight(r) Runtime System (RTS) Release 2.1 or 2.2 o Open Desktop(r) Personal System 1.0.0 or 1.1.0 In all cases, you must have the Operating System LINK package installed on your system. ____________________________________________________________ Note The 1024x768 256 color mode (DVGA) is supported only on 486 EISA bus machines. If the EVC Adapter Supplement is not installed on a 486 EISA bus machine, only the 1024x768 16 color mode (SVGA) and the 640x480 16 color mode (VGA) are available. ____________________________________________________________ 2. Installing the EVC Adapter Supplement Follow these steps to install the EVC Adapter Supplement using the custom(ADM) utility: 1. Log in as root and enter the following command: shutdown -g0 The system shuts down. 2. When the system reboots, enter system maintenance mode by enter- ing the root password and pressing . - 1 - 3. At the system prompt, insert the EVC Adapter Supplement diskette in the floppy drive and enter the following command: custom 4. The screen displays the main custom menu. Press to select the Install option, which is highlighted. Choose the A New Product option from the point-and-pick list by pressing , and then press again to select the Entire Product option. 5. You are prompted to insert Distribution volume 1. Verify that the volume is properly inserted and press . 6. The screen displays the following messages: Installing custom data files... Executing Product Prep Script Saving files in /usr/lib/custom/save 7. You are prompted to insert the EVC Adapter Supplement diskette. Check that the EVC Adapter Supplement diskette is properly inserted in the drive and press . You see the messages Extracting files... and Executing EVC Adapter Supplement Init script. 8. At this point in the installation, you may be prompted to relink the kernel. Whether or not you are promted depends on your currently installed software. If you are not prompted to relink the kernel, skip to step 11. If you are prompted to relink the kernel, this prompt appears: Only Adapter Mode VGA is available unless the kernel will be relinked. Do you wish to relink the kernel now? (y/n/q) Enter y and press . 9. Next, you see the following message: Do you wish this kernel to boot by default? (y/n) Enter y and press . 10. custom displays the following prompt: Do you want the kernel environment rebuilt? (y/n) Enter y and press . At the prompt, press any key to continue. 11. You are prompted if you want to change the adapter mode, which is set to VGA 640x480 by default. If you want to change the adapter mode, you can use the mkdev graphics utility later, or you can choose to change it now. - 2 - If you are installing on a 486-based machine, you can choose from among these modes: - 3 - VGA 640x480 16 colors SVGA 1024x768 16 colors DVGA 1024x768 256 colors If you are installing on a 386-based machine, you can choose only the VGA or SVGA mode. Answer y or n when prompted if you want to change the adapter mode. 12. If you answered n, press any key to return to the custom menu. Exit custom as described in step 21. 13. If you answered y, you see a list of menu options. Select Update by pressing . 14. A point-and-pick list of graphics boards appears. Use your cur- sor keys to highlight EISA Video Card EVC-1 and press . 15. A list of three adapter modes appears. Select one that is per- mitted on your machine. 16. The next prompt allows you to specify which multiscreens you want associated with the currently selected adapter. Specify the multiscreens by using the space bar to mark your selections, or press to choose the default association. 17. You are prompted to tell mkdev graphics to accept or ignore your input. Select Accept. 18. Choose Quit from the displayed list. 19. Select Save from the next displayed menu to effect your changes. 20. The system checks the board configuration files, which takes a few seconds. Press to exit the mkdev graphics, and then press any key to return to the custom menu. 21. Remove the EVC Adapter Supplement diskette from the floppy drive. 22. Exit custom by selecting Quit from the main custom menu and press . Press again to select Yes from the menu. 23. At the system prompt, enter the following command: shutdown -g0 Press any key to reboot your system. 3. Additional Notes - 4 - 3.1 Changing Your Default Font Size Follow these steps to increase your default font size: 1. As root, start an xterm window and enter the following command at the system prompt: cd /usr/lib/X11/fonts/misc 2. Edit the fonts.alias file, adding the following lines to the top of the file: 9x15 fixed 9x15 Fixed 3. For your new default font sizes to take effect while the server is running, enter this command: xset fp rehash Alternately, you could exit the server by pressing . Enter startx to restart the server and effect the new default font sizes. Any client that uses the fixed font alias (such as xterm) now uses this new font size. You can override the default font size for a client by using the -fn command line flag. Refer to your Xsight docu- mentation for more information on font size manipulation and implemen- tation. - 5 -