_____________________________________________________________________________ Welcome to the SCO Advanced Hardware Supplement (AHS) Release 5.2.0 Mass Storage Drivers (os_gpi) directory _____________________________________________________________________________ Thank you for using the SCO AHS Release 5.2.0. The SCO AHS program will continue to provide new hardware support for your SCO operating systems through a number of channels. This file contains: o a contents listing of the current directory o instructions for accessing the AHS Release and Installation Notes and other AHS documentation o instructions for downloading mass storage and multiprocessing drivers o updated notes and known limitations concerning mass storage drivers o lists of supported mass storage and multiprocessing devices NOTE: AHS Release 5.2.0 allows you to install only the drivers you need, which will significantly reduce download and installation time. Rather than installing the entire product, you can install single drivers or technology parcels (containing all drivers of a technology type). This file contains information about the Mass Storage Drivers product only; see the "README" file in the directory above this one for information about the complete AHS product. See the AHS Release and Installation Notes for more information about ``partial installations''; that is, about installing single drivers or technology parcels. _____________________________________________________________________________ Contents of the current directory _____________________________________________________________________________ VOL.*.000 media images of the Mass Storage Drivers product drivers/ tar files of single mass storage and multiprocessing drivers, including: AHS_tools.tar documentation and installation scripts *.tar mass storage and multiprocessing drivers (see the lists of supported mass storage and multiprocess devices below for a mapping of driver names to supported devices) en_inst.ps AHS Release and Installation Notes (PostScript) en_inst.txt AHS Release and Installation Notes (plain text) fr_inst.ps AHS Notes d'accompagnement et d'installation (PostScript) fr_inst.txt AHS Notes d'accompagnement et d'installation (plain text) (French language edition) de_inst.ps AHS Release- und Installationshinweise (PostScript) de_inst.txt AHS Release- und Installationshinweise (plain text) (German language edition) man.ps/ AHS manual pages (PostScript) man.txt/ AHS manual pages (plain text) README this file _____________________________________________________________________________ AHS Release and Installation Notes _____________________________________________________________________________ We recommend that you read the AHS Release and Installation Notes to familiarize yourself with installation procedures before installing AHS products. PostScript and plain text versions of the release notes are located in the same directory as this README file. NOTE: If you are installing boot-time loadable drivers (BTLDs) for your root disk controller, we recommend that you read the manual page for your driver before installing. PostScript and ASCII versions of the BTLD manual pages are located in separate subdirectories. When you download and install the Mass Storage Drivers product or the AHS_tools.tar file, the following HTML online documentation is installed: o AHS Release and Installation Notes o AHS Features and Limitations o AHS manual pages They are included in the online AHS Documentation Set and are available from the online SCO Documentation Library when you invoke ScoHelp. We recommend that you read the AHS Features and Limitations HTML online document using ScoHelp after installing AHS products but before configuring AHS drivers. _____________________________________________________________________________ Downloading mass storage and multiprocessing drivers _____________________________________________________________________________ AHS Release 5.2.0 allows you to install only the drivers you need, which will significantly reduce download and installation time. You can download single drivers or the entire Mass Storage Drivers product (containing all mass storage and multiprocessing drivers): o To download single drivers: 1. Create subdirectories in your download target directory for the Vidconf and driver files: mkdir /tmp/ahs5_2 cd /tmp/ahs5_2 mkdir ahstools See the list of supported mass storage and multiprocessing devices below for a mapping of driver names to supported drivers. 2. Download the AHS_tools.tar file and the driver tar file to their respective subdirectories (using one of the file transfer methods described in the ``Downloading AHS components'' section of the AHS Release and Installation Notes>: cd /tmp/ahs5_2/ahstools cd /tmp/ahs5_2/ .tar> NOTE: Do not place more than one tar file in a directory. When the tar archives are extracted, VOL.*.* media image files are created. If more than one tar archive is extracted, the media image files will be overwritten. 3. Extract the tar archives in their respective directories: cd /tmp/ahs5_2/ahstools tar -xvf AHS_tools.tar cd /tmp/ahs5_2/ tar -xvf .tar 4. Install AHS_tools and the network driver according to the instructions in the ``Installing from downloaded files" section of the AHS Release and Installation Notes. The products will appear as ``media images'' on the local host during the installation process. o To download the entire Mass Storage Drivers product, transfer the VOL.*.000 media image files to your local machine according to the instructions in the ``Downloading AHS components'' section of the AHS Release and Installation Notes. NOTE: Do not change the names of the media image files. Doing so will prevent installation. _____________________________________________________________________________ AHS mass storage drivers notes and known limitations _____________________________________________________________________________ The following notes and limitations supplement those listed in the online AHS Features and Limitations document: o We recommend that you bring your system to single-user (system maintenance) mode before installing or removing any AHS Release 5.2.0 driver. o The AHS Release and Installation Notes describe a known limitation with the Software Manager on SCO OpenServer Release 5.0.0 systems. You might encounter problems under two scenarios: - When removing AHS software, the removal procedure may fail with a ``fork failed'' error message. - The Software Manager prevents Host to Enterprise System upgrades if AHS Release 5.2.0 is installed. You can correct these problems by applying Support Level Supplement SLS OSS408B, an SCO-supplied patch. To acquire the patch, download it from SCO Online Services or contact your SCO Support Services provider. o If you want to remove AHS Release 5.2.0, you must take special precautions if you are using one of these host adapter BTLDs: - Adaptec AIC-6x60 chip sets (smad driver) - Advanced Micro Devices AMD host adapters (ams driver) - BusLogic SCSI Host Adapter (blc driver) - Symbios Logic 53C810 and 8xx series host adapters (slha driver) - Tricord 4-bus host adapters (iiop driver) DO NOT remove the entire AHS Release 5.2.0 or the Mass Storage component. If you do, you will remove your root disk controller driver when the kernel is relinked and the root drive will be inaccessible after rebooting your system. Rather than removing the entire AHS Release 5.2.0 product, select a partial removal, and remove any Release 5.2.0 components EXCEPT the root disk controller driver. If you have already removed the Mass Storage component and relinked your kernel, you can recover by booting the UNIX kernel that was created by default at installation. To do so, enter ``unix.safe'' at the boot prompt. When the system comes up, reinstall the Mass Storage driver you need and relink the kernel. For more information about booting an old kernel, see Chapter 10, ``Starting and stopping the system'' in the SCO OpenServer Handbook. NOTE: If you are using the smad host adapter BTLD supplied with AHS Release 5.2.0 and you remove this driver, the older spad driver will be used in its place. Some host adapters based on the Adaptec 6360 chip sets may not work with the spad driver. The Sjk SCSI jukebox driver is also subject to this problem, although it is not boot-time loadable. Other mass storage drivers included in this release will be replaced with older drivers if the Mass Storage Component is removed. _____________________________________________________________________________ Supported mass storage and multiprocessing devices (by manufacturer) _____________________________________________________________________________ NOTE: Device drivers for listed chip sets are certified to manufacturers' reference circuitry. However, SCO drivers may not work for supported chip sets in all hardware implementations. If you experience problems with a particular chip set, contact your SCO service provider for more information. Supported BTLD mass storage devices: _____________________________________________________________________________ Devices marked with an asterisk (*) are supported by drivers in the SCO OpenServer base operating system. Adaptec AHA-154x series host adapters (ad driver): * AHA-154x series ISA devices AHA-1640 MCA device AHA-1740 and AHA-1742 EISA devices (standard mode only) AHA-174x series EISA host adapters in enhanced mode (eiad driver) * AIC-7770 chip sets (arad driver): AIC-2740/2742 series devices AIC-2840/2842 series devices AIC-78x0 series chip sets (alad driver): AIC-7850, AIC-7870, and AIC-7880 chip sets AHA-29x0 series devices AHA-3940 series devices AIC-6x60 chip sets (smad driver): SCSI Smad Host Adapter SCSI Spad Host Adapter AHA-1510 series devices AHA-1520 series devices AHA-1522 series devices AHA-153x series devices Advanced Micro Devices AMD (ams driver): PCSCSI 2.3.0 PCSCSI (Am53C974) PCSCSI II (Am53C974 A) PCnet*-PCSCSI II (Am79C970 A) BusLogic SCSI Host Adapter (blc driver): BT-946C (PCI Fast SCSI) BT-445S (VL Fast SCSI) BT-646S (MCA Fast SCSI Adapter) BT-542B (ISA SCSI Adapter) BT-747S (EISA Fast Wide SCSI Adapter) BT-742A (EISA SCSI Adapter) BT-545S (Fast SCSI Adapter) CBUS SCSI host adapters (ciha driver) * DPT RAID chip sets (dptr driver): SmartCache III devices SmartCache Plus devices SmartRAID devices EIDE (wd driver): ATAPI CD-ROM Future Domain Corp. 950 chip sets (tmcha driver): * TMC 845, 850, 860, 885 1650, 1670, 1680, 600, and 700 SCSI host adapters (fdha driver) * IBM Hardfile SCSI host adapters (hf driver) * Fixed Disk Adapter/A (esdi driver) Irwin Tape Driver (mc driver) * Mylex Disk Array host adapters (mdac driver): * DAC960 EISA devices DMC960 MCA devices NCR 53C710 MCA SCSI host adapters (ncr driver) * NEC Storage Plus SCSI-AT (SUMO) host adapters (sumo driver) * Olivetti ESC-1, ESC-2, and EFP host adapters (efp driver) * Symbios Logic 53C810 and 8xx series host adapters (slha driver) Tricord 4-bus (iiop driver): PowerFrame 30/40 PowerFrame 300/400 PowerFrame ES3000/4000/5000 Western Digital 7000 SCSI host adapters (wdha driver) * Western Digital 7000ex SCSI host adapters (wdex driver) * These drivers can also be installed after the operating system is installed if they are not required to boot the system. The jukebox(AHS) and irwin(HW) drivers support SCSI devices that are not boot-time loadable. Supported multiprocessing devices: _____________________________________________________________________________ APIC (Intel MPS -- apic driver) Any system conforming to the Intel MultiProcessing Specification Version 1.4. Tricord (tpf driver) PowerFrame Models 30/40 PowerFrame Models 300/400 PowerFrame Models ES3000/4000/5000