Welcome to the Advanced Hardware Supplements (AHS) 5.1 Area ----------------------------------------------------------- This area contains the AHS release 5.1 product for SCO OpenServer 5.0.0. Installing supplements with OpenServer Release 5 ------------------------------------------------ The installation model for OpenServer Release 5 favors installation from disk files that are available either locally or over the network. Supplements can also be installed directly from floppy disks but the installation will take considerably longer and cannot be left to run unattended. AHS installation procedure 1. Obtain the supplement files, via your favorite tranfer protocol, or on diskettes from your SCO supplier. You need at least these files: VOL.000.000 VOL.001.000 VOL.002.000 VOL.003.000 VOL.004.000 btlddisk.Z And one of these: release-notes.ps (which is postscript format) release-notes.txt (which is ascii text format) 2. Log in as root. Enter the following to bring your machine into system maintenance mode: /etc/shutdown -i1 3. Place the supplement files in a convenient place, in their own directory, e.g. /tmp/ahs5_1 From diskettes: copy the floppies to the local hard disk with these commands: mkdir /tmp/ahs5_1 dd if=/dev/fd0 of=/tmp/ahs5_1/VOL.000.000 bs=36b dd if=/dev/fd0 of=/tmp/ahs5_1/VOL.001.000 bs=36b dd if=/dev/fd0 of=/tmp/ahs5_1/VOL.002.000 bs=36b dd if=/dev/fd0 of=/tmp/ahs5_1/VOL.003.000 bs=36b dd if=/dev/fd0 of=/tmp/ahs5_1/VOL.004.000 bs=36b The block size shown (bs=36b) is recommended for 3-1/2 inch floppies; for 5-1/4 inch floppies, use bs=30b. NOTE The AHS installation files can be loaded into any directory you choose, but the actual file names must be the ones shown above. 4. Run the Software Manager from the desktop, or enter scoadmin software from the command line. Select Install New from the Software menu. 5. Identify the installation source: + To install from files on the local host, select the current host and specify Media Images as the media device. Then, enter the name of the directory containing the media images (for example, /tmp/ahs5_1). + To install directly from floppy disks, select the current host and specify the correct Floppy Disk Drive. Insert your floppy disk and click on Continue. + To install from another host, select From another host. Specify the host that contains the AHS software files, and enter the swadmin password for that host when prompted. - If AHS is installed on the remote host, specify Hard Disk as the media device, then select SCO OpenServer Advanced Hardware Supplement. - If the AHS images are loaded onto the remote host but not installed, specify Media Images as the media device. Then enter the full pathname of the directory containing the media images. It will take about one minute for a set of control files to be copied. 5. Choose a Full or Partial installation: + To install the entire Advanced Hardware Supplement Release 5.1.0 product, click on Full. + To install only one component (such as Graphics Drivers, Network Drivers, or Mass Storage Drivers), click on Partial, then select the components you want from the list of available software and click on Install. The components are described in ``AHS components''. + To install one or more drivers from the Mass Storage or Multiprocessing Drivers component, click on Partial, then expand the component that contains the drivers you want to install. From the list of available drivers, select the ones you want and click on Install. 6. When the installation is complete, select Exit from the Host menu. 7. When the system prompt returns, you can delete the Advanced Hardware Supplement Release 5.1.0 volume image files from your system if they are not required for other installations. 8. If the kernel was relinked, you must reboot your system for the changes to take effect. Type init 6, then press to reboot your system. When the system comes up, the new drivers are installed. Backup or otherwise store your distribution files in a safe place. Note: the BTLD diskette is supplied as a separately named floppy image. It should be copied onto a diskette and is used a little differently from the rest of the AHS. See the Release Notes for details. ------------------------------------------------------------------------------ Description of available Advanced Hardware Supplement files File name Size in bytes Description (checksum) btlddisk.Z 648165 (27054) BTLD 3.5" disk image VOL.000.000 1459200 (08008) Volume 1 3.5" disk image VOL.000.000.files 24048 (46189) List of files in Volume 1 disk image VOL.000.000.sum 6 (00061) sum -r of Volume 1 disk image VOL.001.000 1474560 (39814) Volume 2 3.5" disk image VOL.001.000.files 13912 (11770) List of files in Volume 2 disk image VOL.001.000.sum 6 (26684) sum -r of Volume 2 disk image VOL.002.000 1474560 (32724) Volume 3 3.5" disk image VOL.002.000.files 38911 (56506) List of files in Volume 3 disk image VOL.002.000.sum 6 (06204) sum -r of Volume 3 disk image VOL.003.000 1474560 (04912) Volume 4 3.5" disk image VOL.003.000.files 32176 (49779) List of files in Volume 4 disk image VOL.003.000.sum 6 (08251) sum -r of Volume 4 disk image VOL.004.000 512512 (53249) Volume 5 3.5" disk image VOL.004.000.files 9398 (53915) List of files in Volume 5 disk image VOL.004.000.sum 6 (38974) sum -r of Volume 5 disk image release-notes.ps 933477 (24466) Documentation in PostScript format release-notes.txt 126681 (34378) Documentation in ASCII format